Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Trail Tough - M&M-ABT USA order

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 234
Joined: Thu Jan 01, 2004 9:55 pm

Trail Tough - M&M-ABT USA order

Post by Mczook »

G'day All

For those that have displayed interest in any products made by:

Spidertrax (RRO &Calmini available through Spidertrax), All Pro Offroad, MarlinCrawler and Advanced Off Road 4x4;

to be part of the introductory agency offer, orders close this thursday night.

The introductory prices offered last week can be extended in most case. So give Sean or Matt a call at M&M Custom Engineering on 02 458798.

Great prices available on

R&P - depending on what ratios ie Toyo Hi Pinions 5.29 $599
Tcase reduction Gears
Profields
Bellfields
Duel Tcase adapters
Birfield rings
Lockers - Ouick Lok (rebaged detroit), detroit and Lockright

Cheers
Last edited by Mczook on Thu Feb 10, 2005 9:36 am, edited 1 time in total.
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Can you get 8:1's

How much what sort of wait??
yeshemesh
Posts: 234
Joined: Thu Jan 01, 2004 9:55 pm

Post by Mczook »

Giday All

Yes we can get the 8:1s they are custom made to order. They will cost approx $2000 plus fitting. Therefore, order will be taken by deposit only. There is approx 6-8 week wait.

Cheers
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Gear From States - M&M Custom Engineering & Auss

Post by Guy »

Mczook wrote:G'day All

For those that have displayed interest in any products made by:

Spidertrax (RRO &Calmini available through Spidertrax), All Pro Offroad, MarlinCrawler and Advanced Off Road 4x4;

to be part of the introductory agency offer, orders close this thursday night.

The introductory prices offered last week can be extended in most case. So give Sean or Matt a call at M&M Custom Engineering on 02 458798.

Great prices available on

R&P - depending on what ratios ie Toyo Hi Pinions 5.29 $599
Tcase reduction Gears
Profields
Bellfields
Duel Tcase adapters
Birfield rings
Lockers - Ouick Lok (rebaged detroit), detroit and Lockright

Cheers


What were the prioes on introductry offers ?? Like lockers and duals
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 8
Joined: Mon Jul 28, 2003 9:29 pm

Post by Zookamajook »

What are the prices on Quick loks for a Zook?
Posts: 234
Joined: Thu Jan 01, 2004 9:55 pm

Post by Mczook »

G'day Guys

Love_Mud no sure what lockers you prefer on for what truck?

Zookamajook the Quick Loks are $550+ assuming you are looking for a sierra locker.

Dual adapter vary on price depending on which unit:

- The MarlinCrawler MCO7 is $1250+ depending on what freight option( assumed USA air mail);
- The MarlinCrawler MCO8 is $1350+ depending on what freight option (assumed USA air mail). Depending on what Tcase you are adapting input gears maybe required ie 21 to 23.

Cheers

Give Gonads a call to confirm any order plus PM,
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

I think bringing in some 4.16 will be a good idea as Rockhopper aren't doing much with there series ones and we get heaps of inquiries.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

;)
OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 190
Joined: Wed Dec 24, 2003 8:24 am

gear from states

Post by jacka »

How much for the Calmini 5:14 rockcrawler gears?
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Re: gear from states

Post by OVERKILL ENG »

jacka wrote:How much for the Calmini 5:14 rockcrawler gears?



$1750
OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Re: gear from states

Post by DeWsE »

OVERKILL ENGINEERING wrote:
jacka wrote:How much for the Calmini 5:14 rockcrawler gears?



$1750



Are you sure about that overkill? When I asked it was approx 1400 but not garenteed. Then in WA it was around the 1100 mark
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

you could have told me sam b4 i went out and got a series 3 :cry:
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

RB zook wrote:you could have told me sam b4 i went out and got a series 3 :cry:


This price was only given to me on Wednesday. ;)
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

How much did you p[ay for the series three :?:
OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

im about to pay tomorrow 1250
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

OVERKILL ENGINEERING wrote:How much did you p[ay for the series three :?:


$1249 + p/h
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

Liam is selling a series 3 gear set for $1000 right now in the for sale forum.
SUZUKI Remember anything else is a compromise.
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

And Jamie (fourwheelin) sells series 3 for $1149 brand new. (if he still has them on special)
SUZUKI Remember anything else is a compromise.
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

yeah i just seen that liam was sellin his rockhopper like 10 minutes after i ordered one :bad-words:


but its only 250 so it aint that bad
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

Ryan Where did you order from?

Have you got a case and jack shaft etc yet?
Last edited by xtreem on Fri Aug 06, 2004 7:35 pm, edited 1 time in total.
SUZUKI Remember anything else is a compromise.
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

snake racing
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Re: gear from states

Post by nelligen »

jacka wrote:How much for the Calmini 5:14 rockcrawler gears?

I just imported a 5.14 set , payed duty & gst for a total price of $1070 Aust, took about 12 weeks though. Calmini sets include counter shaft,needle bearings , gaskets ,oil (and a few trick stickers & Calmini cap)
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Re: gear from states

Post by xtreem »

nelligen wrote:
jacka wrote:How much for the Calmini 5:14 rockcrawler gears?

I just imported a 5.14 set , payed duty & gst for a total price of $1070 Aust, took about 12 weeks though. Calmini sets include counter shaft,needle bearings , gaskets ,oil (and a few trick stickers & Calmini cap)



He hasn't had the Calmini cap off since he got it either. :P
SUZUKI Remember anything else is a compromise.
Posts: 234
Joined: Thu Jan 01, 2004 9:55 pm

Post by Mczook »

jacka wrote:
How much for the Calmini 5:14 rockcrawler gears?



$1750

_________________
A SIERRA TIM CAN ONLY DREAM OF OWNING
www.overkill4x4.com
ph 94766137


G'day All

Sorry about the price mix up Sam it is the 6.5:1 that is around the $1,700 mark not the 5.14:1

There appears to be some pricing errors for our current order.

Calmini Gears 6.5:1 $1,695 RRP $1,785
Calmini Gears 5.14:1 $1,335 RRP $1,395
Calmini Gears 4.16:2 $1,150 RRP $1,150
Sierra Detroit EZ Locker $599

Pricing between orders fluctuates with the dollar and freight costs. Have a chat to Matt about making a package order if you have several products that you are interested in.

Delivery time is from order date between 5-10 working days in most situations products have arrived and been cleared through customs in 2weeks.

Please note to get the discounted price and not the RRP you will have to note to Matt this post on outerlimits.

Cheers Sean
Posts: 234
Joined: Thu Jan 01, 2004 9:55 pm

Post by Mczook »

G'day All

Last chance for those wanting to take advantage of our bulk order on Friday. In additions to the post above here is a couple more items that u maybe interested in:

Spidertrax winch Bar $995
Spidertrax Drive shaft spacer $85
Spidertrax SPOA $665
Spidertrax Anti Wrap Kit $415
Spidertrax Panhard Kit $645
Spidertrax wheel spacers 1 & 1.25" $295 a pair

Spidertrax Birfield Rings (strengthen CV up to 70%) $110

Calmini XL7, Gvitara, vitara (134% reduction) $2,100
Calmini Sierra Tcase Mount $440
Ring for Calmini suspension pricing and great deals on Brawn winches. Note M&M suspension & barwork is custom made on each customer zooks, call for pricing.

Group purchasing attracts worthwhile discounts, so call or order by the end of Friday.

These items are also available through:
Overkill Engineering Sydney,
Cheezy Racing Melbourne, and
Brawn 4x4 Melbourne.

Cheers PH - 02 45879811 (prices for current order only)
Check out the review of spidertrax products:
http://www.off-road.com/suzuki/reviews/traxdisc.htm disc brake
http://www.off-road.com/suzuki/reviews/traxebrake.htm E brake
http://www.off-road.com/suzuki/reviews/traxspacers.htm wheel spacers
http://www.off-road.com/suzuki/reviews/knobs.htm Gear nob
http://www.off-road.com/suzuki/reviews/rrbirfield.htm Birfield Rings
http://www.off-road.com/suzuki/reviews/traxaxle.htm Rear floating axles
http://www.off-road.com/suzuki/reviews/reverse.htm Reverse shackle calmini food for thought,
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

Im in for a pair of lockers for my 1.3l wide track.
The price seems about $100 cheaper per unit than I have seen.

I think the next best price for auto lockers I have seen was lock rights for $699 each plus freight.

Most places they are $720-750 plus frieght
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Posts: 234
Joined: Thu Jan 01, 2004 9:55 pm

Post by Mczook »

G'day All

If 5 people do a group buy I will do the lockers for $550 and 10 people I can do them for 500. The offer is only valid for this order, it will be finalise today but the pallet will not leave until tuesday next wee.

These prices are the best I can do. You can have your choice of lockright or Detroit EZ locker. My choice is the EZ locker.

Cheers Sean

If these orders are taken up I will ensure return customers are well looked after aswell.
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

Is that 5 or 10 people or 5 or 10 lockers ??
Come on people I want 2 lockers .... make mine cheaper and save your self some $$$ too
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

M&M Custom Engineering
Do we have a web site to peruse, I'm chasing Sierra gearing, thanx, christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 234
Joined: Thu Jan 01, 2004 9:55 pm

USA order - Trail Tough

Post by Mczook »

G'day Zookers

I will be finalising an order from the Trail Tough and Spidertrax early next week. We are providing good discounts on selected items. So those interested in any items PM or call.

Cheers,

Sean Lee

ABT 4x4
+61 2 6291 5994 ph
+61 2 6291 7286 fax
abtmaster@abt4x4.com
www.abt4x4.com – full online purchasing website coming soon!
Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests