Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Axles and splines

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 9
Joined: Sat Nov 08, 2003 12:23 pm
Location: Perth WA

Axles and splines

Post by flano »

Frank, great info in the data post but have a question.

With respect to the front axles, is the spline count the same at the diff centre and at the hub?

I have 28 splines at the hubs. Could this be extrapolated to be 28 splines at the centre and therefore an 8" front diff?

Sean.
'88 NF SWB Intercooler TD, LSD (retired hurt), swaybays (in the garage), 6000lb winch, 2" suspension lift, 31x10.5R15 Goodyear Wrangler MT/R's, Shopping List (LONG).
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Sean, all the hub ends are 28 splines and the same diameter thats why you can fit the manual hubs onto later models.
The side gears are still 28 spline but a different diameter to the hub splines. Unfortunately you can't tell what size diff you have from this.
I just luv my "clacker Jabber"
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests