Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

putting a wt xfer in a coily

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

putting a wt xfer in a coily

Post by RB zook »

ok coily owners bout to put my series 3 in :D and want to know will the wt case just bolt strait in without fawkin around with any thing?


cheers
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

nearly :D
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

you may or may not need to swap the flanges. chances are probably not.
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

flanges are fine as long as the new transfer is wt.The jack shaft is the only difference.
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

If you have the leafy jack shaft & Mounting arms. and large flange case.
SUZUKI Remember anything else is a compromise.
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

sweet i got both mounts from a wt and also got a wt jack shaft so hopefully i put gears in a then bolt wt transfer in and sould be sweet

ready for some crawlin :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

You should beef up the arms before you put it in.
SUZUKI Remember anything else is a compromise.
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

xtreem wrote:You should beef up the arms before you put it in.



how :?:
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

Ryan , I have recently fit one to mine, providing you have the right size flanges it's just a matter of fitting the wide track mounting arms and jack shaft and it fits straight in (piece of piss) you'll need to bend the gear stick to suit your body lift as well. You should also reinforce the mounting arms and fit urethane bushes in place of the stock rubber mounts. You may also like to do the 2 low conversion while the case is apart ,search "2 low" on this forum as I posted instructions and photo's a few months ago
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

You can check out the urathane mounts in the members section under xtreem zook
SUZUKI Remember anything else is a compromise.
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

thanks guys
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

got started on puttin in rockhopper :bad-words: :bad-words: need a press to get bearing off :cry:
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

RB zook wrote:got started on puttin in rockhopper :bad-words: :bad-words: need a press to get bearing off :cry:

Or clever management of a 4lb hammer and a few bits of steel packing & pipe and a few wood blocks ;) ;) :idea:
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

all good the old man will take it to work and get it sorted



i dont wanta fawk the bearings coz im goin to reause them
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests