I put 7" springs under my 80 with castor plates (which i was told r 7 degree). Anyway the car wanders like a dog on heat!!
Took it in to get a wheel alignmet and they informed me that i had 2 deg positive castor and that it sould be in the neg......
Wondering if i dropped the front trailing arms down from the chassis how far would i have to drop them to get the diff to rotate back 3 degrees
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
just wondreing i mean wandering.......
Moderators: toaddog, Elmo, DUDELUX
just wondreing i mean wandering.......
Last edited by crankycruiser on Wed Aug 04, 2004 11:25 pm, edited 2 times in total.
Im here for the sausage!
t
mate nice rig.
ahhh save ya money and learn to live with driving a pig!
keep you alert on long drives.
ahhh save ya money and learn to live with driving a pig!
keep you alert on long drives.
bend your housing....does a good job of altering your camber
Generally speaking I beleive the cruisers do sit with slight positive camber. Tis a worry if it is negative, as you have either bent your housing or your king pins (???) are extremely worn.
Generally speaking I beleive the cruisers do sit with slight positive camber. Tis a worry if it is negative, as you have either bent your housing or your king pins (???) are extremely worn.
If you want a spare 60 for bits-
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
Have heard of these castor plates being a little rough in the 'guestimation' of castor. ie 5 deg only being 1 etc
If you have too much castor it may very well be giving you the wobble.
Did the wheel alignment shop offer any advice? Go to a 4wd place to get alignment as normal alignment shops are not real good for 4wd.
Pretty sure positive castor is what gives you return to centre feel in the the steering. If you have too much though it will cause probs.
If you have too much castor it may very well be giving you the wobble.
Did the wheel alignment shop offer any advice? Go to a 4wd place to get alignment as normal alignment shops are not real good for 4wd.
Pretty sure positive castor is what gives you return to centre feel in the the steering. If you have too much though it will cause probs.
dow50r wrote:Hi
You wont be able to get it back to where u need it with just the 5 degree plates. Caster should be neg 1 but +1 is acceptable, aslong as it is not 0.
U can invert the lower control rods to get it all working, or run front relay rod as in 75 series.
Andrew
Invert the lower control rods?? more info......
r the arms on a 75 any different??
dow50r wrote:Hi Lance, what happens is you flip the lower arms to be ontop of the diff, and flip the panhard to clear the new arm position.
Slowhilux had a piccy of this mod, but i couldnt find it looking through his posts.
Regards
Andrew (limo4b)
Sorry Ray, i have been talking to Lance (bluey) from down your way aswell.
Andrew
sambo wrote:You can get castor correction bearings. that is the ibearings inside the front hubs which the hub pivots on when you turn. You can get them where the bearings are off center and it should fix up ur problem
Hi These are camber adjustment bearings you are talking about. U use them if u have a bent diff from jumping or hitting something
Andrew
Thats ok Ray
If u put skinny tyres on the front, it will be noticeably better to drive. Bottom line here is your plates are not enough correction,and you cant go further till you address the steering rod hitting the lower control arms behind the front diff. There are special control arms u can buy that are shitloads of cash, or you can get rid of that rear steering arm by running front steering as in 75 series (and swapping swivel hubs left to right) or cheapest would be to flip the control arms to ontop of the diff, getting the caster corrected as u go.(then the rear steering arm is below the arms and doesnt hit) I think Sam from Overkill (Sydney) does this. One other benefit of this is your diff goes back forward and tyres dont get as close to the mudflaps
Andrew
If u put skinny tyres on the front, it will be noticeably better to drive. Bottom line here is your plates are not enough correction,and you cant go further till you address the steering rod hitting the lower control arms behind the front diff. There are special control arms u can buy that are shitloads of cash, or you can get rid of that rear steering arm by running front steering as in 75 series (and swapping swivel hubs left to right) or cheapest would be to flip the control arms to ontop of the diff, getting the caster corrected as u go.(then the rear steering arm is below the arms and doesnt hit) I think Sam from Overkill (Sydney) does this. One other benefit of this is your diff goes back forward and tyres dont get as close to the mudflaps
Andrew
There is a guy I know here in sydney that has played around heaps with the toyota control arms.. I have seen the work he did on one cruiser and it looks awsum! He set up the control arms on to the top of the diff... PM me if you want his details.. I do believe he is opening up his own workshop soon... Oh, he also does work on my 4WD... And will be doing more as soon as my back pocket opens up more...
Rob.
Rob.
Chicks dig dents... Just havent found one that does yet!
Who is online
Users browsing this forum: No registered users and 10 guests