Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Which UHF antenna?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Which UHF antenna?
Hi, Im thinking of putting a UH088 into my car.
What would be a good choice of antenna for 4wding
Should I get a ground-independent one?
Low gain or high gain?
Cheers
Eric
What would be a good choice of antenna for 4wding
Should I get a ground-independent one?
Low gain or high gain?
Cheers
Eric
Ground independant 4.5db is a good all round choice.
http://www.gme.net.au/land/ants_uhf.html
I have #10. I also brought a stubby 1/4 wave #2 for when I am not in the bush
http://www.gme.net.au/land/ants_uhf.html
I have #10. I also brought a stubby 1/4 wave #2 for when I am not in the bush
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Weekends - Mav shorty with lots of stuff
Im here for the sausage!
t
Eric is that a Uniden job???
i recently picked up one of these off a mate 2nd hand.
any info shared would be appreicated.
i recently picked up one of these off a mate 2nd hand.
any info shared would be appreicated.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
i have arial 16 , and a uniden radio i think , slim line thou. paid $400 , go to 4wd show, walk from stand to stand and play em off against each other , they are suckers
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Replaced a UH011 with a UH089 radio and still use the Mobile 1 6DB ground independent fibreglass wip aerial. Works OK. My understanding is low gain for hilly terrain and high gain for flat country.
This site might help:-
http://www.gme.net.au/land/choose_ant.html
This site might help:-
http://www.gme.net.au/land/choose_ant.html
Richard
2005 Landcruiser TD100+a few bits
[url=http://members.iinet.net.au/~rwindeyer/IMG_4509adj.jpg][b]My Rig[/b][/url]
[url=http://richardw.redbubble.com/][b]My Profile[/b][/url]
2005 Landcruiser TD100+a few bits
[url=http://members.iinet.net.au/~rwindeyer/IMG_4509adj.jpg][b]My Rig[/b][/url]
[url=http://richardw.redbubble.com/][b]My Profile[/b][/url]
It is a uniden, but I havn't bought mine yet. im looking for a good price.
Have you tried the uniden web site for manuals?
www.uniden.com.au
Eric
Have you tried the uniden web site for manuals?
www.uniden.com.au
Eric
Im here for the sausage!
t
EricB, i dont knnow if it is the going rate or not but i paid 100 for mine
with a heaps dodgy looking aerial.
but now the toss informs me he cant find the brackets to mount it.
so im a little disappointed. but i quickly gave it power and it seems to work ok....
cheers i will try their website for the manual.
with a heaps dodgy looking aerial.
but now the toss informs me he cant find the brackets to mount it.
so im a little disappointed. but i quickly gave it power and it seems to work ok....
cheers i will try their website for the manual.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
Go see Harry at Telstat. He has fitted radios to both of my trucks and his work is excellent.
http://www.telstat.com.au
http://www.telstat.com.au
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Weekends - Mav shorty with lots of stuff
thats the one, i got a uniden uh089 & a GME aerial AE4705
Works great paid $400 from 4wd show last year from Just communications in ringwood, 9879 8111
16 Molan St, Ringwood.
Cheers
Works great paid $400 from 4wd show last year from Just communications in ringwood, 9879 8111
16 Molan St, Ringwood.
Cheers
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
A tip if anyone decides to buy an Electrophone AE409L 6/9Db stainless whip antennae. The whip sections have a habit of fatigueing off immediately above the mount. Get a piece of fuel hose, about 2 inches long, and slide it down over the larger part of the base where the whip goes in, and the grub screw is, leaving about 1 inch up around the whip itself. Now fill the hose around whip with silicon sealer. This gives a much larger area of support, and the whip wont break off.
Mud makes excellent toothpaste.
thanks for the tip on the AE406/9 Mine never actually broke at the base, but has snapped about 3 times in the middle bit. I think these aerials are quite sensitive to where they are mounted. After i moved it from the bullbar to the roof, i have had no more trouble. Good aerial that.
Sam
79Bj40
kg107,999, AE406, Col6M
Sam
79Bj40
kg107,999, AE406, Col6M
thanks for the tip on the AE406/9 Mine never actually broke at the base, but has snapped about 3 times in the middle bit. I think these aerials are quite sensitive to where they are mounted. After i moved it from the bullbar to the roof, i have had no more trouble. Good aerial that.
Like Grandfathers Axe
I have used a Polar 6db I think , for the past 6 years with no problems.
Bazzle
Like Grandfathers Axe
I have used a Polar 6db I think , for the past 6 years with no problems.
Bazzle
BundyRumandCoke wrote:A tip if anyone decides to buy an Electrophone AE409L 6/9Db stainless whip antennae. The whip sections have a habit of fatigueing off immediately above the mount. Get a piece of fuel hose, about 2 inches long, and slide it down over the larger part of the base where the whip goes in, and the grub screw is, leaving about 1 inch up around the whip itself. Now fill the hose around whip with silicon sealer. This gives a much larger area of support, and the whip wont break off.
Don't buy the 6ft one, they are real easy to break if not cautious.
I have a gme 4ft and its great, as long as the bullbar mount is strong they will last
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Who is online
Users browsing this forum: No registered users and 6 guests