Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help with sliders

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Help with sliders

Post by Nev62 »

I'm making a pair of sliders and are after an opinions on the thickness of the mounting brackets. I will be using the existing side step mounting points on the chassis. The sliders are 44mm O/D black pipe with 3mm walls. They are 1800mm long.

Will 3mm plate be thick enough or should I go for 5mm?

Image

Image
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

I replied in general
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

just to let you know ive dinted 3.6mm wall sliders under a zuk

i hope your 3mm ones hold up :?
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

At present I only have the factory side steps which bolt up with a 2mm bracket. Don't forget that my 4B is a Raider so grade 4 is the max it will ever do. The current side steps have saved my sills a couple of times but exhaust pipe is thicker so wanted a little more protection.
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 114
Joined: Fri Aug 08, 2003 2:28 pm
Location: Far Nth Coast NSW

Post by blu125 »

BrodieBuilt is making me some 6mm sliders as I just totalled a 3mm one, on my GQ.

Go heavy!
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

i used 8mm plate to brace it to the chassis, my sliders (off memory) are 3.6mm thick box (100/75) and like mentioned above have bent. on a couple of occassions they have had the weight of the vechicle coming down on them and bar the dents seem to be holding up well.


NICK
TECH SCREW GURU
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest