Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Exhaust / Extractors for GQ on gas

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 32
Joined: Mon Aug 09, 2004 6:23 pm
Location: ACT

Exhaust / Extractors for GQ on gas

Post by XXL Maverick »

How much should I pay for a decent exhaust / extractors set up for my 94 Mav dual fuel??? Is there enough extra power to make it worth it? :?: :?: :?:
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Not in my opinion.
Just put onn a 2 1/4 exh and flow thru muffler.

bazzle

edit: 2 1/2" exh :)
Last edited by bazzle on Fri Aug 13, 2004 12:31 pm, edited 1 time in total.
Top
Posts: 32
Joined: Mon Aug 09, 2004 6:23 pm
Location: ACT

Post by XXL Maverick »

Thanks Bazz.... How many beer vouchers would that set me back. Only had it for 'bout a month. Haven't looked that far into it yet. As with everything; have HUGE plans but limited funds. :cry:
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

I payed $700 fitted. Did it make a difference? I upgraded from 31s to 34s at the same time and didn't notice a difference in performance. So I guess it did make a difference. Sounds great in the bush too!
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Put on the extractors because performance will increase noticibly.Dont forget the straight through sports muffler and no bigger than 2 and a half inch exaust system.Try and get pacemakers as you can wrap them.
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Who is good to use in Melb?

I was just quoted $750 for pacies and a 2 1/4 straight through system.

He said 2 1/2 can be a bit loud with no extra gains.
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

These guys did mine -
Performance Exhaust
49 New St Ringwood
9870 4977

These guys are also good -
Starr Performance
13a Ceylon St Nunawading
9894 8860
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Was it $700 with Pacemakers?
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Genie
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

When you get it done check the specs of the extractors as some are made for top end power and some for torque. If you're in the bush alot you want torque and this may explain why some have had no noticable top end improvement with their new extractors.
I did the extractors and a 2 1/2 in mandrel bent system on my 3.0l petrol and the low down performance has increased substantially and more than overcome the loss I got from fitting the 33" Coopers onto it. It used to struggle at low revs now it just plods along.
Also a K&N cleanable filter.
CJ
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 396
Joined: Wed Dec 17, 2003 3:34 pm
Location: South Side Brisbane

Contact:
Contact Draven

Post by Draven »

Doh, now im confused....in a previous thread I thought a 2 1/2 inch exhaust was to big for a 4.2 petty ? Like a loss of bottom end torque or something ??
Top
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Does anyone know if pacemakers are good for low down power or higher revs?
Top
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Post by marin »

Draven wrote:Doh, now im confused....in a previous thread I thought a 2 1/2 inch exhaust was to big for a 4.2 petty ? Like a loss of bottom end torque or something ??


From what i have heard, if you go LARGER than 2 1/2, you start to lose bottom end.....
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Top
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

When getting Extractors for my GenIII i know different brands had different improvements. Also some were 4 into1 ,or 4 into2 into1
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

I used Unique Exhausts in Bayswater, do a lot of comp trucks.

Pacemakers, 2 1/2" Press Bends and Stainless Straight through muffler dearer but will last with Comps and hard 4x4 use. My last GQ use to eat mufflers from revving hard and then engine braking.

Dynoed on the weekend. Std had 55 KW at the wheels. Electronic Ignition and new exhaust = 70kw at the wheels. Not mallacca horsepower but actual.

Dearer for the system but well worth it.
Top
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

LOCKEE wrote:I used Unique Exhausts in Bayswater, do a lot of comp trucks.

Pacemakers, 2 1/2" Press Bends and Stainless Straight through muffler dearer but will last with Comps and hard 4x4 use. My last GQ use to eat mufflers from revving hard and then engine braking.

Dynoed on the weekend. Std had 55 KW at the wheels. Electronic Ignition and new exhaust = 70kw at the wheels. Not mallacca horsepower but actual.

Dearer for the system but well worth it.



Nice gain, how much was the system and what headers did you use?

How much was the Electronic Ignition?
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Hopefully the power increase was at realistic revs like when you need it in the bush or general driving.
ie. 1500 to 2500rpms??

Bazzle ;)
Top
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

My TB42 is lacking from 1500-2000rpm :?
Top
Posts: 396
Joined: Wed Dec 17, 2003 3:34 pm
Location: South Side Brisbane

Contact:
Contact Draven

Post by Draven »

Yea..what mods have ya done ? I found that decent electronic ignition helped a lot
Top
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

What brand?

No mods to engine yet I just did a major service to get her in good nic
Top
Posts: 396
Joined: Wed Dec 17, 2003 3:34 pm
Location: South Side Brisbane

Contact:
Contact Draven

Post by Draven »

Well...Im 'really' not sure what ignition...but a MSD coil and LPG leads
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

Sandy from Aus4wd for ignition

Main Power is from 2250 to 4600 RPM, fine for the driving and comp work I do.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 69 guests