Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Nissan 4 or 5spd in 68 2a

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 52
Joined: Thu Apr 15, 2004 10:30 pm
Location: Wyong

Nissan 4 or 5spd in 68 2a

Post by Boxhead »

My brother has a 68 2a long wheel base with a 186 holden motor . can anyone give their opinion on that conversion, marks 4wd adaptors used to do these conversions.Have been told that with this conversion and a rear salsbury diff will stop gear box and axle breakages, is this true? Boxhead.
Top
Posts: 13
Joined: Wed Dec 31, 2003 12:36 pm
Location: Melbourne

Post by Hardtop_110 »

I had the Marks 5sp Nissan box in a 2a. It was originally fitted with a stroked 253, but later changed to a 186. Was matched up with S111 Stage 1 rear diff (3.54). This combination was unreal, never had any rear axle, rear diff or transmission problems.

Daryl
Daryl Snowdon
Melbourne Australia
1954 86" Series 1 Hardtop - 'under construction'
1993 110" Defender Hardtop
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

The rear salisbury diff is basically a Dana 60 with smaller axles. Should have no problems.

Gearbox - check oil regularly, should be no problems otherwise. I know of one failure of a gearbox in this conversion for this reason.

Pity about the holden engine though... :D
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest