Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

G52 Bellhousings (and W series)

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

G52 Bellhousings (and W series)

Post by ToNkA »

I need to know what bellhousings bolt up to the G52Box, as I need one to fit the 1ggze engine. I know that the 1ggze bolts up the g52 as a mates bundy bolts up, but he didnt do the conversion and aint sure what was used.

Anyone out there know anything?

Can someone tell me about W series boxes and their difference to the G52? Someone said that I can use the W series bellhousing on my G52 and it will bolt to the 1ggze.

:?
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Posts: 65
Joined: Fri May 07, 2004 12:12 pm

Post by PSI3y »

g52 has different gear ratios to the w56/57/58 and i dont dont know much about different strength levels.

http://www.4wd.net.nz/suprasurf_part2.htm has the three compared, im pretty sure that the one which he is talking about that doesnt fit the m series is the one for you.(the middle one)

they should be easier to find than the m series.
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Was the 1g-gze a manual? If so its bellhousing will bolt up to the g52 gearbox.
Where the f#@k did that come from
Top
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Post by slowhilux »

The 1GGZE never came manual from the factory, only auto. Both the 1GGTE and 1GGE came as manual and auto
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

In that case I'd be willing to bet (ziltch) that the 1g-gze and the 1g-geu share the same block and crank.
Send Mike (SupraSurf) an email via his website, he'll clear the matter up.
Where the f#@k did that come from
Top
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Post by slowhilux »

All the 1G series share the same block/bellhousing bolt pattern, but the cranks are different (same flywheel mounting tho).

Tonka,
ddeane on toymods has a 1G bellhousing for sale, might pay to send him a private message
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

I got one thanks.

;)
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

Hey Tonka,

The 1GGTE engine that I put in my bundy previously used the w-series box and the bellhousing bolted straight up to my G52.

1GGTE Engine -> 1GGTE Bellhousing -> G52 Gearbox....etc

The bundy had a 22R engine, 2.4L Petrol.

Cheers Mate.

Nick
______________________
PRAISE THE LIFTED
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 12 guests