Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ok finally gonna get some energy and hook up the rear maxi I didnt want to hook it up straight away as i think it would take the challenge out of everyday weekend drivin at ormeau
One Question is in regards to the vacume storage cylinder, the line that feed the cylinder from the manifold.... where do i splice it into on the manifold ? ? ? so it can be feed with the pressure
A pic with it circled or something would be of great assistance thanks
Hi.
I spliced into the booster vaccuum line on my rangie. Just got a T piece and some other reduction fittings and bingo.
Hope this was of some help.
Cheers
Giles
OK I dont think you should be doing this if you dont know where the booster is on yours Anthony!!
Its under the bonnet joined to the inlet manifold by a 3/8 rubber hose.