Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engineers?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Engineers?
What engineers have people had dealings with? I need an engineer to approve the mods to my zook. I’d like to hear people’s feed back regarding any engineers that has approved mods to their vehicles. I’m located near wagga but I’m prepared to travel some distance if it means dealing with an engineer that has experience with modified vehicles.
Subversive Bucolicism
Posts: 9196
Joined: Sat Mar 13, 2004 10:47 pm
Joined: Sat Mar 13, 2004 10:47 pm
Location: I think I hear a Dingo eating your Baby
Contact:
contact your states licencing authority they should be able to provide a list of engineers
when i applied for approval to do the mods on my vehicle they sent a list with the approval
im in WA
when i applied for approval to do the mods on my vehicle they sent a list with the approval
im in WA
Workplace Safety :
Destroying our forests one Take 5 at a time.
Every time you do a Take 5 an Orangutan cries.
https://www.facebook.com/shadowthetravelcat" onclick="window.open(this.href);return false;
Destroying our forests one Take 5 at a time.
Every time you do a Take 5 an Orangutan cries.
https://www.facebook.com/shadowthetravelcat" onclick="window.open(this.href);return false;
Ray Cross at Lismore is the bloke who is certifying my truck atmo. He was the nearest to me so I've been ringing him as I've been doing mods, based on what I've heard other people have done to their fourbys and had engineered.
Right from the start he said he did not like 4x4's and would not approve 35 inch tyres but I pressed ahead anyhow cos a few people said he was a good bloke to deal with.
He rang me other day after I showed him the completed major mods (80 series diffs into Hilux with all custom suspension) and said he would approve all the suspension mods but not the tyres, cost $660.
So at least some of my truck is roadworthy, I may have to drive to Sydney in the hope an engineer down there will pass the tyres, as they seem pretty lenient based on some of the trucks I've seen.
Josh.
Right from the start he said he did not like 4x4's and would not approve 35 inch tyres but I pressed ahead anyhow cos a few people said he was a good bloke to deal with.
He rang me other day after I showed him the completed major mods (80 series diffs into Hilux with all custom suspension) and said he would approve all the suspension mods but not the tyres, cost $660.
So at least some of my truck is roadworthy, I may have to drive to Sydney in the hope an engineer down there will pass the tyres, as they seem pretty lenient based on some of the trucks I've seen.
Josh.
I've asked slosh that beforeWendle wrote:john wilson is pretty good, he is at burra. probably a bit far.
pm CRL11N on this board, he has used a bloke in cooma who was pretty good too.
thanks i will do that.
Thanks guys this is just the type of feed back i wanted. there is always talk of engineering's on this board but no one ever seems to mention who they used to approve their mods. this sort of feed back is important to everyone.
Who is online
Users browsing this forum: No registered users and 3 guests