Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

beadlock outer ring

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

beadlock outer ring

Post by hottiemonster »

how much would a beadlock outer ring be to purchase? as i think i stuffed mine when i rolled the tyre off the rim and bent the outer ring.

i tried bashing it into place again but it still leaks, just a rough idea will do or a place where i can get one.

thanks

Peter
Gq ute new built
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Pro comp.

$fark all
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

Guts wrote:Pro comp.

$fark all


i was at pro comp today trying to fix it, well i just did all the nuts up just then, but i wanna tighten them more, there also seems to be gaps in between the bolts so i need to fix em up. so i will see tomorrow if it holds up, but in my opinion, i dont think it will :bad-words:
Gq ute new built
Posts: 849
Joined: Fri Apr 23, 2004 12:30 pm
Location: Mornington, Vic

Post by MYTTUF »

Arent they PGS beadlocks??? If they are James has outer rings at the shop.
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!

www.autobalance.com.au
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Post by GUEEY »

MYTTUF wrote:Arent they PGS beadlocks??? If they are James has outer rings at the shop.
The Beadlocks are from Total 4WD in Epping, and on a Bias Ply tyre it is normal to have gaps between the inner and outer ring
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

GUEEY wrote:
MYTTUF wrote:Arent they PGS beadlocks??? If they are James has outer rings at the shop.
The Beadlocks are from Total 4WD in Epping, and on a Bias Ply tyre it is normal to have gaps between the inner and outer ring


well i got air in the tyre and it seems to be holding so i will find out in a few days if the tyre has lost air, but if it is leaking still, its not gushing out like before :armsup:
Gq ute new built
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

just get one from cheezy on your account :finger:
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

Big Red Toy wrote:just get one from cheezy on your account :finger:


i didnt meet his requirements by "the boss" his missus. :cry: but it seems to be working now, just need to check presure in a few days. so cross ur fingers and hope for the best :armsup:
Gq ute new built
The Haggler!
Posts: 6652
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

You going to tell us what you had for lunch too.

Jesus, you asked a question and you got your answer.

Stop giving us a running commentary of every little thing you do.

:roll:
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

Image
Because its as usefull as petes running comentry :finger:
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 1586
Joined: Wed Mar 10, 2004 9:51 am
Location: Tumut NSW

Post by DFND90 »

Is that dog wearing leather?

..kinky
[url=http://gods4suckers.net]god is for suckers[/url]
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

maybe? i dont really know??? just a random pic off the net
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests