Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Front drive shaft
Moderators: toaddog, Elmo, DUDELUX
Front drive shaft
Just wondering who's put IFS springs in the front, what they did to lengthen front drive shaft, did all get new custom made, or can you get original lengthened, or I've been told the shafts in 4 runners and surfs are longer, what about something out of a 60 or something, what's my options, as cash is starting to get a little low.
Try not to let your mind wander...It is too
small and fragile to be out by itself.
small and fragile to be out by itself.
yeah i have the same problem at the moment
i'm thinking of running a shortened rear shaft in the front. if you grind the weld transfercase end of the tailshaft end, cut however much you need out and weld the flange back on, i think that'll work. also hilux's have to longest slip out of the toyota's, so best to try and use a hilux one
i'm thinking of running a shortened rear shaft in the front. if you grind the weld transfercase end of the tailshaft end, cut however much you need out and weld the flange back on, i think that'll work. also hilux's have to longest slip out of the toyota's, so best to try and use a hilux one
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
www.jaybeecanvas.com
Re: Front drive shaft
My Lil Lux wrote:Just wondering who's put IFS springs in the front.
Ruff, don't really know how it went but he took them out pretty quick
HOOLAY Wish i could buy boggers for my DH bike
do none of the above, if u run ifs rears up front setup properly u will get big flex and the std slip joint aint long enuf. u need 2 get a long slip spline from a driveshaft mob, i think ORI does them as well.
the slip joint in mine has 300mm of spline and it uses all of it !!!!!!!!!!!!!!!!!
the slip joint in mine has 300mm of spline and it uses all of it !!!!!!!!!!!!!!!!!
HYPOFAB Thanks to:
Polyperformance
Yuri 4x4
Longfield
Who is online
Users browsing this forum: No registered users and 1 guest