Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Frontera free wheeling

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 1
Joined: Fri Sep 10, 2004 10:50 pm
Location: Townsville

Frontera free wheeling

Post by Warren Gale »

Hi,

I am new to this site. But haver plenty of Questions.
I own a 2002 v6 frontera wagon. Which doesn't have free wheeling hubs.
Do any of the rodeo or jackaroo wheel hubs and free wheeling hubs fit. I have the Frontera raise 50mm rear 40mm approx front. Would like free wheeling hubs to take some of the work of the cv joints.

Next question is do es anyone know if the Lokka diff lock fit the front of the frontera and how well do they work and what are the adverse side effects if any.

Cheers
Top
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

Found some info that should be what you are after...

http://www.pirate4x4.com/forum/showthread.php?t=279765

The Rodeo in the states is the Frontera over here...

Cheers,

Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
Top
Posts: 27
Joined: Fri May 16, 2003 10:29 pm

Post by DGPirie »

HAve you had any luck Warren. I contacted Calmini about a set of their manula hubs and they referred me to USA4WD I think it was (Perth?). Emailed them but never got a reply. Looking to reduce fuel consumption and avoid hard work if I do a CV or front diff.

David
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 7 guests