Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80S AND 105S Trailing Arms
Moderators: toaddog, Elmo, DUDELUX
80S AND 105S Trailing Arms
Does anyone know if 80S and 105S front trailing arms are interchangeable.I have a set of 80S arms at home and would like to get caster bushes fitted to them and then fit to the HZJ105.That way vehicle would not be off the road for long.Grasshopper.
Gday
They are thesame...the 105 is an 80 chassis with longer body mounts....was wanting to put 105 diffs in my 80 for the ratio change...little wider, nothing some larger flares wont fix...anyway, it takes longer, but you are better off slotting the front hole of the diff and keeping the rubber bushes (which articulate better) 14mm slotting equals 2 degrees, once both are slotted, have the caster checked, and when the desired caster is reached, weld the washers u put on the slots to the diff brackets. If 2 degrese is not enough, slot the rear holes next for 4 degrees, or buy plates for 5.
Andrew
They are thesame...the 105 is an 80 chassis with longer body mounts....was wanting to put 105 diffs in my 80 for the ratio change...little wider, nothing some larger flares wont fix...anyway, it takes longer, but you are better off slotting the front hole of the diff and keeping the rubber bushes (which articulate better) 14mm slotting equals 2 degrees, once both are slotted, have the caster checked, and when the desired caster is reached, weld the washers u put on the slots to the diff brackets. If 2 degrese is not enough, slot the rear holes next for 4 degrees, or buy plates for 5.
Andrew
Who is online
Users browsing this forum: No registered users and 0 guests