Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

colour(s) and design, how to paint?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply

which should i do?


get a similar colour to the current one and bodge it up.
1
5%
same as above and put some more stupid stickers on to help hide bodginess :lol:
3
15%
go the whole thing matt black
1
5%
matt black with a flame design on the front half
4
20%
camo design (unsure of colours as yet, so give me some ideas)
11
55%
 
Total votes: 20

Posts: 779
Joined: Tue Sep 02, 2003 8:17 pm
Location: Penrith, N.S.W

colour(s) and design, how to paint?

Post by markil »

well i rolled my zook some weeks ago. it's dark blue ATM but when i get me new windscreen fame and targa bar they'll need to be painted. and i was thinking i might change the colour of the whole car at the same time. so here a few ideas i had;


give me your thoughts fellas :armsup:
Mark.
Posts: 150
Joined: Wed Feb 18, 2004 8:17 pm
Location: Perth

Post by Badooky »

go the camo :lol: :lol:
to many people are doing the mat black with flames
(me included :finger: )
It's the one on the right, Dammit !!!
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

The white night rust guard paint I used for my spray was unreal

It comes in about 16 colours, you can get all colours in 1lt tins, some in 4ltrs.

At 19.99 a tin it cost me $60 to do the whole car and 2 sets of doors.

Its available at any bunnings and you can get matching colours off the shelf in rattle cans for touch ups.
yeshemesh
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

matt black is actually illegal, to do with visibility. A few cars in victoria have been given canaries for matt black paint jobs, mind you they had other things that were picked up too but the colour was mentioned on the reports
Ransom note = demand + collage
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Badooky that is sad, what happened to bright orange?

I'm with you Bigsteve that paint sounds good. do they have a dark green?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Post by runnin4life »

how hard is spraying i did some of it at school but that was just painting a lawnmower
the only thing i worry about is getting runs could i just wipe the paint off were it run let it dry sand the area back and then start again etc

and can i use just a cheapy $30 spray gun from super cheap or should i convince my dad to get a really good quality one
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

zukin4life wrote:how hard is spraying i did some of it at school but that was just painting a lawnmower
the only thing i worry about is getting runs could i just wipe the paint off were it run let it dry sand the area back and then start again etc

and can i use just a cheapy $30 spray gun from super cheap or should i convince my dad to get a really good quality one


grimbo used spray cans I think....so super cheap is fine, just remember it's not gonna look pro but who really cares. I have only washed my car three times in a year and a half
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I used a couple of cans of Colourbond paint for my first colour change. It went easily, just gave the car a light sand and no problems. Current colour has used about 8 cans, been a bit harder as the orange didn't want to go over the green as well. Looked abit ripe in places.

As long as you clean the surface then sand it and clean it once more and work slow enough to guarantee an even finish it should be fine
Ransom note = demand + collage
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

[quote="grimbo"]I used a couple of cans of Colourbond paint for my first colour change. It went easily, just gave the car a light sand and no problems. Current colour has used about 8 cans, been a bit harder as the orange didn't want to go over the green as well. Looked abit ripe in places.

As long as you clean the surface then sand it and clean it once more and work slow enough to guarantee an even finish it should be fine

And thats where most paint jobs go ass up. If you go slow you won't have probs with running either
Last edited by DeWsE on Wed Sep 15, 2004 6:04 pm, edited 1 time in total.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Post by runnin4life »

ok thanks guys
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

I picked the camo , what a buzz all the choices yet the first four went the camo :D

Very interesting,

grimbo seen some cool stencils the other day ,for cheetah spots would look exellent on the lower half . :cool:
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Post by runnin4life »

u can buy stencils i thought i just like painted it one colour then just spayed dots and lines were ever and then used another colour etc
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

zukin4life wrote:how hard is spraying i did some of it at school but that was just painting a lawnmower
the only thing i worry about is getting runs could i just wipe the paint off were it run let it dry sand the area back and then start again etc

and can i use just a cheapy $30 spray gun from super cheap or should i convince my dad to get a really good quality one


Easy as dude ;) Like said go slow but also do lots of lighter coats instead of a few heavy ones. More sanding sure but no runs ;)
Posts: 779
Joined: Tue Sep 02, 2003 8:17 pm
Location: Penrith, N.S.W

Post by markil »

well the camo is definately winning so far, but what colours should i use?
i'm thinking outside of the square a little too ;) maybe blues and greys for easy coverage? as i have the blue there already. or should i just do a traditional mix of greens, browns etc?

any other ideas?
Mark.
User avatar
Ric
Posts: 302
Joined: Wed May 05, 2004 12:26 pm
Location: Brisbane

Post by Ric »

white, grey and black.
'07 ML Triton

12 tonne excavator for hire:0421 076 548
Posts: 11
Joined: Fri Jul 18, 2003 11:14 pm
Location: Darwin

Post by Nook »

Karmic was good enough to host a couple of scanned books I did on spray pianting. They may Help

http://suzuki.agrajag.org/

Cheers
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

awesome link lots of cool stuff on that site
Ransom note = demand + collage
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

I like the idea of snow camo at the moment. :cool:
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest