This is for 95 "classic" range rover. Is it as simple as drilling holes in the air tank and screwing in the fittings? anyone done this? Where did you get the fittings from?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
using factory air compressor for tyres
Moderator: Micka
You could but....
Everytime you pumped tyres the air / comp would try and rase suspension and you would have to have the car running
The easiest and cheapest thing todo would be to buy a after market portable unit.. The air sus system in rovers can get very $$ to fix so it probabley best not to use it for anything other then it's intended purpose
HTH
MIck
Everytime you pumped tyres the air / comp would try and rase suspension and you would have to have the car running
The easiest and cheapest thing todo would be to buy a after market portable unit.. The air sus system in rovers can get very $$ to fix so it probabley best not to use it for anything other then it's intended purpose
HTH
MIck
TD5 96 Discovery UTE.
mickrangie wrote: The air sus system in rovers can get very $$ to fix so it probabley best not to use it for anything other then it's intended purpose
HTH
MIck
Yes and no - as far as expensive to fix goes, the bits are all pretty cheap now air bags etc and all the fittings come from pirtek or enzed.
Tom
why would it do that? I thought the sensors were on the bags not on the compressor? Doesn't the compressor simply maintain pressure in the tank? Also are the compressors not very reliable or fast? I assumed that for the application of airbags they would have to be heavy duty.mickrangie wrote:You could but....
Everytime you pumped tyres the air / comp would try and rase suspension
HTH
MIck
No drilling required.
Just intercept the air line from resevoir where ever is convenient and fit a tyre style inflation valve.
You may have to mix and match fitting as line size varies.
Do not use air tool style fittings - only 120PSI v EAS 150+ PSI.
Most bits available from SMC or Norgren - outlets throughout Australia.
No problems with computers etc.
You are on the right track, Muppet. The worst that can happen is you'll drain all air out of reservoir and compressor will run for longer to catch up, but it should have a auto cut-out to prevent burning out anyway.
Mine is p38 but same theory should apply to classic, only equipment locations are differant.
Best advice - whatever you do, allow for easy reversal to factory standard....
http://www.rangerovers.net/outfitting/air/arbair.html
Have fun,
Hardy
Just intercept the air line from resevoir where ever is convenient and fit a tyre style inflation valve.
You may have to mix and match fitting as line size varies.
Do not use air tool style fittings - only 120PSI v EAS 150+ PSI.
Most bits available from SMC or Norgren - outlets throughout Australia.
No problems with computers etc.
You are on the right track, Muppet. The worst that can happen is you'll drain all air out of reservoir and compressor will run for longer to catch up, but it should have a auto cut-out to prevent burning out anyway.
Mine is p38 but same theory should apply to classic, only equipment locations are differant.
Best advice - whatever you do, allow for easy reversal to factory standard....
http://www.rangerovers.net/outfitting/air/arbair.html
Have fun,
Hardy
Who is online
Users browsing this forum: No registered users and 2 guests