Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
can anyone tell me what the spline count is on the Spline of the transfer case input to the back of the gearbox, ( so basically where the transfer and box connect together, wan to know the pline count on the transfer spline.
On a 40 series or 60 series transfer case......
hope this makes sence
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
The 3 speed transmission output shaft usually has 10 splines. The 4 speed if mated to a one piece transfer, 16 splines. The 4 speed and 5 speed mated to the 40 or 60 split transfer, 19 splines.
The 5 speed is always mated to the split transfer, so the output is always 19 spline. But the 4 speed is either mated to the split or the one piece, so either 16 or 19 spline.
