Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hi guys, new to the forums, and pretty new to four wheeling

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

that white paint job is nice mate! how much did it cost ya?
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

Thanks mate, I am glad u like it, what colour is yours?
I did it myself and I bought a cheap air compressor and spraygun to do it.

With the aircompressor and all about $800 and some farken long days.
The paint, as i said before, is pure white so it only costs $65 for 4L (which it a fark load of paint, i used about 6L) and no colour matching needed when I bend pannels!!! (not thant any of us like bending pannels)

It's not bad for my first go at spraying, i reckon.

Regards,
Nick
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

hey nick

mine is that brown colour / champagne colour type ..

its OK for what it is, but I will change it one day when it needs it.. panels are all ok so far, no colour mismatches, so its good for now

has some rust tho, which my gf's uncle will be cutting out in the future - thats when I will respray it..

did yours have rust?
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

taziiy wrote:
spazbot wrote:the cvs should be fine
you will prolly need to replace all the seals in the knuckles a seal kit costs around $110 for both sides and should only take a day or so to do.
Not a very big task as long as you have a few tools. Might be worth doing the wheel bearings at the same time thats about another $50 a side for bearings.

here is a desc from a US website

http://4crawler.cruiserpages.com/4x4/Ch ... uild.shtml


i did the seals in my hilux it took about 6hrs to do


Christ! How long were you asleep for??
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

Only rust in mine was at the bottom of the drivers door (hadn't gone right through) and at the roof gutter join above the driver door.
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

mate cv joint seal kits complete kits at 69 dollars a side at burson at the moment and 28 dollars a side for wheel bearing till 15th of march getting some in a couple of weeks. they got a sale of landcruiser parts at the moment.
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

doh@Q!

paid a bit more than that!

-robbie
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

it's not too late to stock up on spares. you can use them when your cv grenades.

edit: fixed spelling errors (too many beers)
Top
Posts: 105
Joined: Thu Nov 28, 2002 8:17 pm
Location: woonona

Post by GRUNTLESS »

Ruggers wrote:mate cv joint seal kits complete kits at 69 dollars a side at burson at the moment and 28 dollars a side for wheel bearing till 15th of march getting some in a couple of weeks. they got a sale of landcruiser parts at the moment.


been getting swivle hub kits for about $95 (both sides)
and wheel bearings for $29 a side :finger: :wink:
only cheap wine comes in 5 litres..........
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 6 guests