Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

33 10.5 15 Muddies...Do they scrub??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

33 10.5 15 Muddies...Do they scrub??

Post by Chookman »

Am looking at changing my 31 inch AT's on my LWB GQ for some 33's
Has anyone fitted BFG 33 10.5 15 muddies with only a 2 inch spring lift and experienced any scrubbing?

Thanks
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I have the 33 x 10.50 with a 3" lift and the rears touch the inner rear wheel arch on full stuff
Ransom note = demand + collage
Top
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

Post by Chookman »

Thanks Grimbo

Do you know if your truck is on its bump stops when they touch??

Chook
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

to be honest I don't know. I'll try and see.
Ransom note = demand + collage
Top
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

What rims you on, cruiser offset is the way to go and i have a set of 4 wrangler 33's 95% on cruiser offset rims, currently on gq wagon but wanting to sell toget 35s, or if you know anyone esle chaseing some
thanks

Bingham
Sunshine coast.
Top
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Post by grazza »

right rear rubs on captive nut on inner guard, occasionally.
33" MTR's with 70mm spring and 30mm bidy lift
not a problem for me
Top
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

Post by Chookman »

Grazza
thanks for the info

Bingham wrote:What rims you on, cruiser offset is the way to go
Bingham
Sunshine coast.


Bingham.... whats the difference between cruiser and Nissan offset??

Chook
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Chookman wrote:Grazza
thanks for the info

Bingham wrote:What rims you on, cruiser offset is the way to go
Bingham
Sunshine coast.


Bingham.... whats the difference between cruiser and Nissan offset??

Chook


Depends on which nissan rims you have but I think it's normally along the line of -10mm for Cruiser, 0 for wide wheel 15x7 GQ and +25 for 16x6 GQ.

+25 is bad..... mmmkay?
Top
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

Post by Chookman »

Beastmavster wrote:Depends on which nissan rims you have but I think it's normally along the line of -10mm for Cruiser, 0 for wide wheel 15x7 GQ and +25 for 16x6 GQ.

+25 is bad..... mmmkay?


Thanks Beast
Have bog standard ROH GQ steel rims which are in good condition.
Intention is just to go for some muddies on the rims I have as the wallet won't allow me to change both.
Was curious as to what the difference was.

Chook
Top
Posts: 18
Joined: Tue May 18, 2004 6:50 pm
Location: Vic

Post by Troll »

I Have 33 10.5 ATs on nissan offset rims with 2 inch lift.

They hit the top on the wheel well on the big dips of the cape road. But a half inch addition to the bump stops has eliminated this

Cheers
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests