Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Possibly stupid fridge idea

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Possibly stupid fridge idea

Post by chimpboy »

This may be dumb, but Pick 'n' Pay currently have 66 litre fridges on sale for $99; they are about 460 x 500 x 520mm in size on the outside. They are a proper fridge, with compressor, and about 85W. Chinese-made but there's nothing glaringly awful about the quality, at the price.

What about running one of these with a small, cheap inverter? You'd come out under $150 and have a real fridge...

Jason
This is not legal advice.
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

Even with a 300W inverter costing $89 you would be way ahead of the game - I reckon it would work like a champion, engel fridges run off
200W inverter plugged into a ciggy socket no worries.

Plus if it shat itself you could probably rebuild it with better compressors etc.

Tom
Posts: 916
Joined: Tue Jul 27, 2004 2:33 pm
Location: Engadine, Sydney

Post by searsy989 »

Cheap pirce + made in China + a compresser = A peice of shit (oh no, bad experience thought returning)
The machine is now alive...
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

searsy989 wrote:Cheap pirce + made in China + a compresser = A peice of shit (oh no, bad experience thought returning)


It is all relative isn't it.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

searsy989 wrote:Cheap pirce + made in China + a compresser = A peice of shit (oh no, bad experience thought returning)


not neccessarily.

For that price and with a warranty from the retailer I say give it a go
Ransom note = demand + collage
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

Is it an uprigt type of fridge or a chest type like Engel/Waeco etc??

At that price you really can't go wrong, can you!!


Regards
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

bigbluemav wrote:Is it an uprigt type of fridge or a chest type like Engel/Waeco etc??

At that price you really can't go wrong, can you!!


Regards


Upright type. So you'd have to secure things in there a little bit I suppose... if you drive like I do anyway...

Jason
This is not legal advice.
Posts: 116
Joined: Wed Jun 09, 2004 1:54 pm
Location: Floating at Sea

Post by Deano »

Wouldnt you have to run it in the upright position? If you laid it down there would be problems with condensor and fluid flow through it?

At least thats what the guy at the fridge shop said when I was moving houses and had my fridge, laid down horizontal in the back of a ute.

Were you planing to run it upright anyhow?
I wish I was hardcore
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Deano wrote:Wouldnt you have to run it in the upright position? If you laid it down there would be problems with condensor and fluid flow through it?

At least thats what the guy at the fridge shop said when I was moving houses and had my fridge, laid down horizontal in the back of a ute.

Were you planing to run it upright anyhow?


I'm not planning to run it at all; it's to big for my SWB... I just thought it might be an idea for someone. But yep, you'd want to run it upright.
This is not legal advice.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Story:

I did a little time working as a removalist, and normal household fridges were always left off for two hours after moving, to give the refrigerant time to settle again. This was an order from a government department that we did a lot of work for, as they discovered that if the fridge was rolled off the truck and turned on straight away the compressor would often die within a few days.

Their theory is that while the refrigerant is still stirred up from bouncing down the ramp, up the front steps and over the threshold it doesn't lubricate the compressor properly on startup (or some such story...) If the fridge is allowed to settle for two hours before turning on they found they didn't lose as many compressors.

This cheap chinese compressor may not like being shaken around, so it may not last long in the back of a fourby. But at that price its almost disposable.

Cheers,

Scott
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Post by big red »

dont forget you have to multiply the running current by about seven to get the start up current.
your inverter needs to bigger than that.

The other thing is they would not like the shaking at all and could break the internal springs or pipework inside the compressor housing.

BTW... the wait time after moving a fridge is to give any displaced oil a chance to flow back to the compressor and you cannot run them on an angle.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

i have a 200W inverter in my truck for laptops / camera batteries etc and that can run a 34cm TV just, but the inverter has a 'strict' warning on the side of it, not to run anything such as a fridge / air compressor etc, anything with a compressor in it. i don't know why it gives this warning, but i thought i would let you know anyway.
:?:
indubitably
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests