Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Re powering a R46 with a 18R motor

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 9
Joined: Thu Oct 07, 2004 12:39 pm

Re powering a R46 with a 18R motor

Post by brett43au »

Hi all I Have a old but good R46 Hilux 4X4 with a R18 motor with a 4 speed gear box. It is all in good condition but lacking any power or top speed. What would be a easy and chaep repower option . The present motor is fine it just lacks power and top speed. My preference would be for somthing that I could do myself.

Any advise would be apreciated.

Thanks
Brett
Posts: 123
Joined: Tue May 25, 2004 11:09 am
Location: perth

Post by bear »

GDay mate, got a rn46 myself with a 18rg and a 4 speed. Easy fixes for a start would be a set of extractors and a free flow exhaust. A 5 speed gbox would assist on road legs. A holley carb to help the fuel side? It all depends what and where you want the power? Good Luck ps where you from
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Post by bubs »

easy bolt in swap is a 22R (2.4L) or a 21R (2.2L)

the 22R you will find a good runner for around the 1000 complete

21R - good runing engine $150

There is some tricks, both engines will require the engine mounts off a 4wd 22R block, then both will bolt right in no problems to the original 4 speed

Done this myself
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Posts: 9
Joined: Thu Oct 07, 2004 12:39 pm

Post by brett43au »

Thanks , I will look out for a 22r motor

Brett
Brett
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests