Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gen1 PTO information?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 26
Joined: Sat Jan 04, 2003 7:17 am
Location: Ocean Springs MS USA

Gen1 PTO information?

Post by LandRaider »

Hey guys.

I have been doing some research on the gen1 transfer cases, and I have been looking for a PTO. I got my auto case all set up for a PTO, but I just can't find one. Do you guys know of any in the junkyards? where to buy one new?

Any information at all is appreciated. Anyone elese have a PTO on an automatic transmission truck?
87Raider. 4.3 TBI, 700r4, NP231
twin bouncy seats Herculined Everything
SAS'd Front, D44 w/SPOOL

Low Buck Offroad build in full effect!
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Well I've only seen a handfull of factory PTO's they were all on the 2.3 turbo diesel and were all 5 sp manuals.
We never got the 4sp auto with a Gen 1 (only with the V6).
The 4 cylinder has a t/case reduction of 1.944:1 so you will have to find the gearing to suit that idler gear. Also the auto selector cable runs over the idler gear cover plate where the PTO will bolt up to so you will have to modify that.
These PTO units are extremely rare over here (much rarer than 5.29's) and are now very old so to find one complete at a junkyard would be just about impossible.
Sorry...............
Maybe post on the wanted section on the Pajero Club forum.
http://www.pajeroclub.com.au/forum/
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest