Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
i got my exhaust from mqt or MTQ or sumfen would have to check
anyways they make a much larger cast dump pipe for the turbo
or did you get get yours fabed from the turbo and ditched this morkz
yeh mine was must similar to that of MTQ's as i do have larger cast dump pipe it was quite larger and thus having more flow.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
i was hoping to have before results but i'll try and get a copy i have the orginal which shows that it was running higher EGT's and lower boost.
cheers
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Trol TD6 wrote:So what sort of temps are you running now under heavy load? ie. heavy acceleration up long hill/range in 4th/5th?
Hey Trol
i wont be able to work this out unless i put a pyro meter in, maybe i'am wrong ?
the only reason why i didnt put one in at the moment was cost around $350 fitted (which is still quite reasonable price to pay)
however when funds allow i will put one in.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Not cheap are they the ol' gauges. Just had them put in mine and set me back a few $$$ for the pod as well. But it's the best thing to have, peace of mind!
Not cheap are they the ol' gauges. Just had them put in mine and set me back a few $$$ for the pod as well. But it's the best thing to have, peace of mind!
Cheers.
hey trol did u have photo's of the guages and the pod? where did u mount them was it a pillar pod?
cheers
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
i wonder if these would be better mounted on the pillar ?
Easier to view and save the space below for UHF
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
My UHF sits nicely on under the stereo, removed the original unit, fitted a pioneer mp3 wma deck with dual pre outs for sub etc with flip down screen and the uhf sits under that. I took out the recessed plastic bits holder as it was no use to me.
I guess it depends on what you want. I'd prefer that those sort of things are easy to see, but not easy to see for people looking into the car for their personal gain. Plus, it gives away your mods too easily!
My UHF sits nicely on under the stereo, removed the original unit, fitted a pioneer mp3 wma deck with dual pre outs for sub etc with flip down screen and the uhf sits under that. I took out the recessed plastic bits holder as it was no use to me.
I guess it depends on what you want. I'd prefer that those sort of things are easy to see, but not easy to see for people looking into the car for their personal gain. Plus, it gives away your mods too easily!
Cheers mate,
Chris.
yeh i agree with you there.... You dont want anyone seeing your mods.
in regards to UHF position i still factory Head unit, hoping to change to something later when funds allow.
I'm hoping to mount my UHF where your guages are.
cheers
James
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
You would never see those gauges when you need them.
Going up a steep hill, rutted, or greasy, you would have to spend too much time looking at the track concentrating to see the EGT.
I had a look at that, but I've transfered the uniden UHF with me that's pretty big, if you have one of those sexy new little units, you'll be laughing!
If you do have the larger sized uniden, you may have some issues fitting it behind, can't quite remember...
I actually wanted to use the cupholders to sit the gauges in, but it wasn't quite high enough, but the gauges would have sat in there perfectly with a small piece of clear pespex on top so I could still utilise the cup holders...
I had a look at that, but I've transfered the uniden UHF with me that's pretty big, if you have one of those sexy new little units, you'll be laughing!
If you do have the larger sized uniden, you may have some issues fitting it behind, can't quite remember...
I actually wanted to use the cupholders to sit the gauges in, but it wasn't quite high enough, but the gauges would have sat in there perfectly with a small piece of clear pespex on top so I could still utilise the cup holders...
Good luck mate!
Chris.
Yeah i have TX3400 it has the remote head unit, will be mounting it as soon i have time to fit my dual battery system.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
bogged wrote:You would never see those gauges when you need them. Going up a steep hill, rutted, or greasy, you would have to spend too much time looking at the track concentrating to see the EGT.
Lucky I don't need to mate...having a case of de ja vu here!
E.G.T's never get high enough to worry, even with the boost etc that I run, max is 550.
I had a look at that, but I've transfered the uniden UHF with me that's pretty big, if you have one of those sexy new little units, you'll be laughing!
If you do have the larger sized uniden, you may have some issues fitting it behind, can't quite remember...
I actually wanted to use the cupholders to sit the gauges in, but it wasn't quite high enough, but the gauges would have sat in there perfectly with a small piece of clear pespex on top so I could still utilise the cup holders...
Good luck mate!
Chris.
Yeah i have TX3400 it has the remote head unit, will be mounting it as soon i have time to fit my dual battery system.
Sounds good mate. You happy with your mods to date?
Trol TD6 wrote:Plus, it gives away your mods too easily!
posting photos of them on the web would NEVER do that
Why?
in one breath yoru saying dont give away your mod ideas, then they are posted up on the web for BILLIONS to see...
Hahahahaha.
Nah mate, said that I'd rather keep the mods out of the way so when nasty people look into the truck to pick up for free and/or ya competitive mates, you don't have wanka gauges hanging off your pillar.
morkz wrote:hey bruce if you ever drive up my way i'm near nunawading behind the old wobbies world on springvale rd take mine for a drive it is pretty amazing.
added the before and after dyno sheet for boost and air flow.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
