Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

timing

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 757
Joined: Thu Oct 09, 2003 12:13 pm
Location: Brisbane

timing

Post by Thonger »

Just a quick one, have the workshop manual, but should I adjust the timing on the ignition to suit the fact that I'm running unleaded and not leaded.
Thonger
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I've only ever run unleaded and only set the timing as per factory specs, although with lpg i have set it at 12btdc and it seems fine there even when on ulp.

nick.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 219
Joined: Sun Jan 05, 2003 8:33 pm
Location: Newcastle

Post by Ralf the RR »

Loanrangie wrote:I've only ever run unleaded and only set the timing as per factory specs, although with lpg i have set it at 12btdc and it seems fine there even when on ulp.

nick.


I have my 79 dual fuel set to 12 degrees also.
I found that it pings using normal unleaded, so I use premium.
LRP is rated to 95, and still pings a little, but is hard to find these days.
Harry

79 Rangie (his name is Ralf) 4.4 dual fuel, with plenty of other mods.

Oils leaks are a factory option to prevent rust!
Top
Posts: 9
Joined: Wed Oct 06, 2004 9:04 pm

Post by Dave J »

12°btdc !

Manual for my '86 says 0°btdc, and I have an 8:1 motor.

Running unleaded I am worried at 2°btdc. Why the huge difference? or does efi advance kick in way quicker.

DJ
Top
Posts: 757
Joined: Thu Oct 09, 2003 12:13 pm
Location: Brisbane

Post by Thonger »

Loanrangie wrote:I've only ever run unleaded and only set the timing as per factory specs, although with lpg i have set it at 12btdc and it seems fine there even when on ulp.

nick.


Cheers Loanrangie I've also changed the holley according to your advice, seems to have helped.
Thonger
Top
Posts: 219
Joined: Sun Jan 05, 2003 8:33 pm
Location: Newcastle

Post by Ralf the RR »

Dave J wrote:12°btdc !

Manual for my '86 says 0°btdc, and I have an 8:1 motor.

Running unleaded I am worried at 2°btdc. Why the huge difference? or does efi advance kick in way quicker.

DJ


Dual fuel is a compromise.
Gas requires a lot of advance.
I run mine mainly on gas, so set the advance for it.
I only put about 30L of petrol through every 6-8 weeks.
With 12 degrees, unleaded pings, so I use premium, and it doesn't.

But back to the original thread.
We also have an 80RR on petrol only.
The workshop manual specifies 4 degress AFTER TDC.
Never heard of this before, on any vehicle.
So it's set for 4 degress BTDC.
Used to run it on LRP, but now run it on normal unleaded (even Woolies).
Seems to go OK, and doesn't ping.
Harry

79 Rangie (his name is Ralf) 4.4 dual fuel, with plenty of other mods.

Oils leaks are a factory option to prevent rust!
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

My 81' i think was atdc in the timing but i have put in a bosch dizzy which has a recomended timing of 10 btdc, but 12 suits the lpg better and doesnt ping on ulp. Once holleys are setup, they go alright.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

sorry but what is a ping?
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Fishman., ping is that horrible noise when either the engine is under load in the wrong gear or when the timing is out causing a rattling type noise.
Any luck with getting a rangie ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

gees man i just saw u are from sthelena, thats like beside greensborough!!! where i live, kool, umm na not yet hopefully we are going down on sat or sunday, should be good, havn't seen the interior in pics so maybe thats fucked up but if it is mechanically good i will give hima bit of a barter
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

so you blokes set her for 12 degrees before at idle for gas. I am assuming that is on 3.5L engines.

3.9 be the same ? or should I do the ultra technical - trial and error :)
I should really buy a vacuum gauge

TIA
Tom
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests