Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux f/glass guards

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

hilux f/glass guards

Post by STUMPY »

Is anyone making fibreglass guards for hilux's in australia?

would anyone be interested in some?
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 13
Joined: Wed Jun 23, 2004 7:43 pm
Location: kanwal

hilux f/glass guards

Post by Madmat »

i would be
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

I know Binskins 4WD makes kevlar panels for Nissans... maybe you could get in touch with them, supply a few panels for moulds.. there sure are plenty of comp hiluxs out there that would use them.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 116
Joined: Wed Aug 18, 2004 9:40 pm
Location: Tas

Post by hiluxv8 »

theres a set on ebay atm,for early model 79-83,flares look a bit bigger than normal,got me interested.
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

its not set in concrete yet, but in the next couple of months i might be producing some moulds to produce kevlar composite panels and i'm looking possible at cut down doors aswell.
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 391
Joined: Wed May 26, 2004 6:20 pm
Location: Seaham NSW

Post by My Lil Lux »

I'd be keen on your cut down door idea, was gonna do it with my two doors that I have now, as both have been damaged, so if you want some to experiment with let us know. :D
Try not to let your mind wander...It is too
small and fragile to be out by itself.
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

STUMPY wrote:its not set in concrete yet, but in the next couple of months i might be producing some moulds to produce kevlar composite panels and i'm looking possible at cut down doors aswell.


would be very interested keep us posted
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

Wasn't Ruff and/or Nick doing something with these early last year?
Top
Posts: 818
Joined: Thu Nov 20, 2003 9:06 am
Location: Bathurst NSW

Post by professor »

I'm interested

Can we have some input into the design or is it allready drawn up!

Chad
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

professor wrote:I'm interested

Can we have some input into the design or is it allready drawn up!

Chad


as for input into design, i'm sure that could arranged for the cut down doors but for the guards i'm keen to mould them off the factory guards. i've seen some one guards that have altered and they look Grimace. i'm planning to start first with gen 2 hilux front guards then maybe gen 3's. cut down doors will be later in the pipeline. if it all goes ahead it'll take a while for the tooling up.
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Guards & Doors

Post by benhl »

Very interested in Guards and woul dbe willing to give the cut down doors a sticky too. Keep us posted! :cool:
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 0 guests