Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LEXUS V8 into LUX

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 248
Joined: Mon Oct 21, 2002 8:55 am

LEXUS V8 into LUX

Post by spice »

was thinkin of diff engines to put in once the 2.8 dies and i want somethin with serious power but dont want to run 350chev etc due to fuel costs. but i saw in 4wd monthly a dude put a lexus v8 into his dual cab lux and thought that would be a good idea. but i would like it to a manual not an auto.. would this be possible? fuel consumption would be bout the same as what im gettin now as we have a soarer v8 and it is only 250 kg's lighter than the lux so would be bugger all difference.. anyone got ideas??
NAM IS THE SOFTPORN KING!!!

<mage> what should I give sister for unzipping?
<Kevyn> Um. Ten bucks?
<mage> no I mean like, WinZip?
Posts: 34
Joined: Tue Jan 28, 2003 5:55 pm
Location: Brizzy

Post by sillyca »

my dad has a lexus v8 in his nissan and it's a manual, goes hard, it's wicked 8)
"BLING BLING"

Got Rice?...I Do! :mrgreen:

www.buds4x4.com
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

if you care about fuel economy why not get a 1KZ-TE (3.0 turbo diesel) like the current hilux/prado. prob a cheaper conversion than the V8, motor will bolt in, engine mounts, bellhousing etc all line up. get some fat intercooler action going and you'll have buckets of power and zillions of fuel economy.

see 1KZ-TE's in the 'just 4wd's' type mags for around $4 - 5k, and there would be little else to spend.
Posts: 408
Joined: Fri Nov 08, 2002 8:09 am
Location: Mainland, NZ

Post by suprasurf »

If you go for a lexus with auto, it all bolts together factory... easy !!
www.4wd.net.nz
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

suprasurf wrote:If you go for a lexus with auto, it all bolts together factory... easy !!


can you get a gear driven case to bolt behind the auto?
i was thinking if you could do that and put 4.7 gears in it, or 5.1s you could have a light and super strong drivetrain for a buggy?!?!?!?!
hands and mums dont count!!!
Posts: 408
Joined: Fri Nov 08, 2002 8:09 am
Location: Mainland, NZ

Post by suprasurf »

bj on roids wrote:
suprasurf wrote:If you go for a lexus with auto, it all bolts together factory... easy !!


can you get a gear driven case to bolt behind the auto?
i was thinking if you could do that and put 4.7 gears in it, or 5.1s you could have a light and super strong drivetrain for a buggy?!?!?!?!


Marlin makes adapters for EVERTHING you ever dreamed of :D
www.4wd.net.nz
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

The lexus doesn't quite fit in the hilux engine bay, you have to move the oil filter (change to remote mount) and a few other odds & ends... Probably no harder than any other swap, excluding all the electronic bits.
Posts: 52
Joined: Wed Nov 20, 2002 1:39 pm
Location: Sydney

Post by Rexlux »

Dellow Automotive in Sydney makes a bellhousing for Lexus V8 to either G52 or R150(V6 4Runner) 5 speeds for about $450/500. If you give the old wiring loom and new loom to an auto sparky they can adapt a new loom to plug straight in.

I looked at this option for my 84 lux but went for 1KZ 3.0 TD instead. Better low down grunt and fuel economy. Bloke in Bris gets 130hp at rear wheels with same fuel economy just by better tuning and fiddling with turbo, costs about $1600 to do. All Jap in Brisbane and Ichiban in Sydney will sell you a 1KZ(import) for just under $3000. I got mine from a Wrecked hilux with only 12000km's on it but paid a bit more. Also got gearbox and transfer etc etc out of wreck. Havent bolted it in yet so cant comment on that.
Posts: 248
Joined: Mon Oct 21, 2002 8:55 am

Post by spice »

how do you figure more low end grunt?? are you talkin in a towing sense? the v8 hauls serious a$$,
NAM IS THE SOFTPORN KING!!!

<mage> what should I give sister for unzipping?
<Kevyn> Um. Ten bucks?
<mage> no I mean like, WinZip?
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

your dad will not let you do it spice you are a dreamer!

I have some cool info for any serious people doing 1UZ-FE conversions, and stuff, and will learn you all mor info as i go along.

I will post everything I know as it comes to hand, which could be 1 million years away at the speed i work.

This is cause i am putting a 1uz into my street car!
hands and mums dont count!!!
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

It will probly be lighter than your diesel :shock:
hands and mums dont count!!!
Posts: 248
Joined: Mon Oct 21, 2002 8:55 am

Post by spice »

nah bj not a dreamer my old man has given me the ok to do it... he is even gunna chip in some $$ to pay for the engine, maybe the whole engine if i get my way muahahahaha :lol: :lol:
NAM IS THE SOFTPORN KING!!!

<mage> what should I give sister for unzipping?
<Kevyn> Um. Ten bucks?
<mage> no I mean like, WinZip?
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

ill sell you my motor, complete with harness, loom, computer, automatic gearbox and everything
perfect

$1800
hands and mums dont count!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests