Today I received a Suzisport fitting kit listed in their catalogue for Holley 180 and Weber 32/36 .
The kit will only fit a Weber 32/36 DGV with several modifications.
1 The air cleaner is the incorrect shape for a Weber. I can cut some material from the aircleaner hole to make it fit but the overlaps are pretty small in places.
2 the accelerator cable bracket is completely wrong. It appears that the Holley opens the same way as the Mikuni Solex, but MOST 32/36 DGVs are the opposite ie the cablecomes in from the left. To fit the bracket I will have to grind a lot out of between the bolt holes, and bend it 90 degrees upward.
3 The most common Weber in Oz is the 32/36 from a Cortina 2 litre, and that is the one I have. Reversed ones were apparently fitted to Renaults, and we all know how common they are.
I haven't yet checked the actual adaptor plate , but hopefully SOMETHING is right.
Just so you know.
Regards Philip A
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Suzisport kit for Weber onto Vitara
Who is online
Users browsing this forum: No registered users and 0 guests