Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Starter Dramas
Moderator: Tiny
Starter Dramas
Anyone replaced or recon a starter? whats your advice and also any idea of prices.
numerous times when mine was original
mud seems to kill a lot of things
easier to remove it...........clean it up and reinstall it.
main issue seems to be mud and shite coming in contact with the brushes followed by mud and shite in the actual gears which hitting it with a hammer usually loosens (when its in the vehicle and you're having trouble with it).
make sure your wiring is good as well and its well earthed
mud seems to kill a lot of things
easier to remove it...........clean it up and reinstall it.
main issue seems to be mud and shite coming in contact with the brushes followed by mud and shite in the actual gears which hitting it with a hammer usually loosens (when its in the vehicle and you're having trouble with it).
make sure your wiring is good as well and its well earthed
[color=orange] BESTY [/color]
GU4800
GU4800
Mine was failing to throw out (or retract?) once the engine started and making all sorts of noises.
I pulled it out and cleaned it all internally, then lubed everything on the throw out mechanism with silicone spray. There's a one way gear/ clutch that gets full of crud and won't free spin. Liberal quantites of silicone spray while spinning the clutch will clean it out and make it run free again. Has been fine since and that was over a year ago.
A mechanic gave me the tip to use silicone spray as it won't attract dirt like grease will.
I pulled it out and cleaned it all internally, then lubed everything on the throw out mechanism with silicone spray. There's a one way gear/ clutch that gets full of crud and won't free spin. Liberal quantites of silicone spray while spinning the clutch will clean it out and make it run free again. Has been fine since and that was over a year ago.
A mechanic gave me the tip to use silicone spray as it won't attract dirt like grease will.
David
?
Well it's working ok now. it was making noises when first starting before it failed. but now it seems ok and the noises arent there. Might c how it goes and try the silicone thing.
I also had my charge and brakes lights flicker on just before all this happened so I'm hoping it was related and not an alternator hicup.
I also had my charge and brakes lights flicker on just before all this happened so I'm hoping it was related and not an alternator hicup.
Who is online
Users browsing this forum: No registered users and 2 guests