Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
front spring mounts finished. front springs in and diff in test fit location. It will need to come forward a bit yet. rear spring mounts also done, but i need to make some shackles to get the springs to fit.
here's the front done.
Why haven’t I been keeping up with this thread! It looks as though it’s coming along great. The idea of lux springs is pretty cool also kinda cheap at the same time.
Keep up the good work.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
the front springs are currently stock front lux springs, with 2 leaves removed. Shackle reversal. had to do a chassis extention at the front and more the rear hangers back a bit aswell. the springs were free trying to keep the costs down on some stuff so that the money can be better spent in other areas.
redzook wrote:your lux springs are a nice idea they work well on the front of the aztec there strong and cheap and have an offset pin
edit : just noticed they are lux fronts so they dont have the offset pin
the fronts need some work. i think i'm still gonna run the front lux springs in the front because they are flatter. i'll re drill the pin so that the pin is offset.
the rear are lux rears but they are in backwards so that i get my wheelbase extended and a better departure angle.
-Mick- wrote:Funky long shackles How long are they
i made the shackles extra long and drilled several different holes in them so that i could play with the length. the shackles are a very temporary setup when i'm happy with a length of the shackles i will make some new ones that are stronger. there is currently 250mm between the pins. they are big.
It is a sad techno world we live in when I can see your house from my veranda, we've been mates for years, we are separated at work by a glass window and I STILL haven't come over to see your crazy Zook.
Kane said your roster has been messed up... when are you off so I can come over and see?
The winch for the Sube will be finished this weekend.
It is a sad techno world we live in when I can see your house from my veranda, we've been mates for years, we are separated at work by a glass window and I STILL haven't come over to see your crazy Zook.
Kane said your roster has been messed up... when are you off so I can come over and see?
The winch for the Sube will be finished this weekend.
we're both off next weekend, so i'll give ya a call.
Engine In.
Body On.
Test fit of some rubber, front diff is going to be moved forward 3 or 4 inches. I might still have to get a bit creative with the angle grinder on the front of the body, just to make sure the tires don't rub on full compression.
redzook wrote:how much did u move the front hanger forward over the stock one?
u would have needed to move it atleast 4.5-5 inch to get it back to stock wheelbase
so its actually moved back over stock?
the front hangers have been moved about 5 inches forward, hence the reason that the mounts currently stick out a bit, they will be braced soon. The front axle is in stock postion with the hilux springs. when i move the diff further forward it will be moving it further forward then the stock postion.
kroozer91 wrote:They will more than certinally do tha job, bring on the hill climbs
Get your ass back down here.. and bring some more home made bourbon
Yeh well mabe visy contacted me yesterday to tell me that the job will be going ahead so mabe i might take it and moove back not to sure yet will have to have a good think about it....