Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disco series 1 radio

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
User avatar
PK
Posts: 266
Joined: Thu Nov 11, 2004 10:35 am

Disco series 1 radio

Post by PK »

Hi - hope you can help! I am trying to get to the back of my radio (Disco series 1 1999) so I can plug an antenna in. - How do I remove the radio, or is there an easier way to get to the back of it? :D
Top
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

Post by up2nogood »

Just pull on it. Should come straight out, if memory serves me correctly.
Top
Posts: 145
Joined: Fri Dec 19, 2003 2:35 pm

Post by Maxtd5def »

You need a couple of bladed thingys, to slip vertically down the ends & release the catches, & pull with a third hand, if you know what I mean.

But I don't know where you' buy or borrow these, haven't seen them for a while. (I watched Graeme Coper pull mine out)

Regards
Max P
Stereo by Simex!
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Don't listen to MaxTd5, up2nogood is right. I've just replaced the radio in my 98 Discovery in the last 10 mins.

I too had read on the net that there are special keys that need to be slotted down the side. I didnt have anything handy so i just popped into the local JB and asked the installation guys if they would mind getting it out for me seeing as I didnt have a key thing.

He puts his fingers into the cassette slot and just gives it a pull. Out it pops!!! At this point i felt a bit stupid!! :oops:
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Top
Posts: 145
Joined: Fri Dec 19, 2003 2:35 pm

Post by Maxtd5def »

Mine was a 92, and it needed them
Stereo by Simex!
Top
User avatar
PK
Posts: 266
Joined: Thu Nov 11, 2004 10:35 am

Post by PK »

Thanks for that! So how hard do I pull? I know, I'll stop just before it breaks....... :D

Seriously, thanks and I'll give it a try
Top
Posts: 5
Joined: Wed Nov 10, 2004 6:39 pm
Location: Australia

Post by Td5Xtreme »

You can damage the dash surrounds - if you just 'pull out' the radio .
Your local car stereo installer can remove the radio in 'seconds' - without any damage to the dash .
Just a matter of the 'right tools for the job'
Then you can install the new radio yourself - by following the instructions provided with the new 'head unit' .
Td5 ;)
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Td5Xtreme wrote:Your local car stereo installer can remove the radio in 'seconds' - without any damage to the dash.


Yup - by pulling it out! ;)
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Top
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

Post by up2nogood »

Gently pull on the unit while "wiggling" it side to side.

If the sucker ain't gonna move then take to radio joint. Or, if you have your replacement radio already, use the keys it came with.

Or a hammer and pry bar. :D
Top
User avatar
PK
Posts: 266
Joined: Thu Nov 11, 2004 10:35 am

Post by PK »

Got it out!!
Thanks for that :D
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests