Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Best value 4 inch lift kit for GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 74
Joined: Mon May 17, 2004 10:30 pm
Location: sunshine coast, QLD

Best value 4 inch lift kit for GQ

Post by Terry_Toyota »

I am purchasing a gq ute or shorty :) in the next week or so and was wondering what the best lift kit on the market was for both price and quality. I want to run 35's so i think 4 inch should be enough lift???

cheers any help will be greatly appriciated.

Nick
Live it, Love it, Don't waste it ;)
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

4 inch is good.

go the dobinson kit. They are good.

JK (dirtpigs) runs them and hes quite happy with them.

Mind you a 4 inch lift you'd most likely need castor plates.

TOM
Top
Posts: 194
Joined: Sun Apr 13, 2003 4:01 pm
Location: Melbourne

Post by Boopa »

GQ wrote:4 inch is good.

go the dobinson kit. They are good.

JK (dirtpigs) runs them and hes quite happy with them.

Mind you a 4 inch lift you'd most likely need castor plates.

TOM


...what's the story with dobinson shocks...any good?

am looking at their 4" coils & shocks also...and it makes sense that they should be matched right?

Boopa
Top
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

Post by 92mav »

goto artic cool treads in Brisbane, i only paid $1500 for the lot fitted 4 procomp shocks i believe they use kings springs, adjustable panhards castor plates and a steering dampener
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Top
Posts: 194
Joined: Sun Apr 13, 2003 4:01 pm
Location: Melbourne

Post by Boopa »

GQ wrote:4 inch is good.

go the dobinson kit. They are good.

JK (dirtpigs) runs them and hes quite happy with them.

Mind you a 4 inch lift you'd most likely need castor plates.

TOM


...what's the story with dobinson shocks...any good?

am looking at their 4" coils & shocks also...and it makes sense that they should be matched right?

Boopa
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Boopa just PM Dirtpigs off the board or look 4 his members section he will tell you straight no bull on wat there like im reasonably sure he hasnt had no dramas with em and I think he was impressed with the bumpstop style setup on the shock itself




Dan
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 194
Joined: Sun Apr 13, 2003 4:01 pm
Location: Melbourne

Post by Boopa »

A1MAV wrote:Boopa just PM Dirtpigs off the board or look 4 his members section he will tell you straight no bull on wat there like im reasonably sure he hasnt had no dramas with em and I think he was impressed with the bumpstop style setup on the shock itself




Dan


cheers Dan...will do. :cool:
Top
Posts: 74
Joined: Mon May 17, 2004 10:30 pm
Location: sunshine coast, QLD

Post by Terry_Toyota »

goto artic cool treads in Brisbane, i only paid $1500 for the lot fitted 4 procomp shocks i believe they use kings springs, adjustable panhards castor plates and a steering dampener





This deal sounds awesum!!
I follow it up. Might have enough left over for a locker now :)
Live it, Love it, Don't waste it ;)
Top
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

Post by 92mav »

i find it works very well ask for jason
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Top
Posts: 70
Joined: Tue Sep 14, 2004 10:25 pm
Location: Croatia, Europe

Contact:
Contact majti

Post by majti »

GQ wrote:4 inch is good.

go the dobinson kit. They are good.

JK (dirtpigs) runs them and hes quite happy with them.

Mind you a 4 inch lift you'd most likely need castor plates.

TOM


Will caster bushes do or plates are neccessery?
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

Bushes adjust corect for 3", plates for 5" so either way is not right. the only way to be perfectly correct is with droparms but they are around $1800.00. most people go bushes on 4"
Tiny :twisted:
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

or wizard drop brackets

or 5 link

are a few ways to adjust castor

TOM
Top
Posts: 31
Joined: Tue Oct 05, 2004 11:44 am
Location: Queensland

Post by Trol TD6 »

Gday mate!

Go Dobinson, have had that on the GQ running 4 inch, but the bushes flogged out in 40 thou. Get the caster correction plates. Really good suspension.

Got dobinson in the GU, have 3 inch at moment, cost 700 fitted (no castor plates/panhard rods needed). Going the 4 inch need a little extra clearance under steps and will level out camper trailer.

Good luck!
If it burns...you can smoke it!
Top
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Post by dieseldude »

I run Dobinson coils on my truck with procomp explorer shocks.

I was told that they don't make dobinson shocks.

The combination is excellent! It flexes awesome.

I jusst got some castor plates cut at the local engineering company.

Anyway, I'd buy them again.

Smithy
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

Tough dog shocks are pretty good so far on my rig. Mind you the Meglift springs are sagging on the passenger side after 8 months and castor bushes are trashed.
Does anyone have a profile for the castor plates for a 4"? If I can get one I will have them cut out and fit the things.
As for that deal with panhard rods etc for $1500, thats a bargain!

CJ
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 188
Joined: Mon Aug 02, 2004 12:31 pm
Location: Dandenong-Victoria

Post by bigpat »

I know its far, but you can give Cheezy Racing in Melbourne a call.
He did a 4"lift and guard chop(including flares), looked after springs, shocks everything on a mates GQ shortyfor about $3500 drive in -drive out, I think.... :roll: :roll:

He already has a 2" body lift and now it should have enough clearance to run 37's!

Cheezy's work is top notch. Longer rear arms, and cut & re-weld front diff ( no dodgy castor plates), drives great on road (no shimmy or vagueness) and FLEXES ITS ARSE OFF IN THE BUSH!!! :armsup: :armsup:

Either go to www.cheezyracing.com.au or call (03) 9762 9032

Might save ya heaps of stuffing around, and allow to get down here and play in real mud....

Pat
BIG.PAT
'92 Surf 2.4 TD 5 speed.
More Boost, Intercooled),
Body & sup lifts, 31x10.5 Simex M/Ts (Bigger soon) & Big Boomin Stereo!

More to come when the $$$$ sum.....
Top
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Contact:
Contact GRINCH

Post by GRINCH »

go and have a chat to bob at allset springs located at fishermans rd maroochydore ph no is 54796530. ive got 4" dobinson springs with procomp shocks works very well & good ride
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests