Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TD5 what to look for !

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

TD5 what to look for !

Post by jbell »

I`m going to have a look at a td5 defender tray back

just wondering what to look out for, its done 133000ks 2000 model

I`ve only ever had rover V8s so I`m not up to speed

on diesels [ no V8s in tray backs-bummer] So any

knowledge would be appreciated.

Thanks JEFF
rover money pit on mogs !!!
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Some of the very early models had problems with flywheel vibration, so make sure it idles smoothly, accelerates smoothly, and the clutch works without shuddering. Try to find evidence (documented or physical) of the fuel filter(s) being replaced at regular intervals - you want those expensive injectors to last as long as possible!!! And also of course the usual stuff like oil, etc - and check for excess oil in the turbo outlet/intercooler.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
tim
Posts: 47
Joined: Tue Apr 06, 2004 11:14 pm
Location: UK

Post by tim »

Some early ones also suffered with surging on the electronic throttle control.

Mine did but the chipping took care of that.

Tim
Life's too short for a full time job
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Keep an eye out for oil running along the wiring loom down to the ECU. This is a common problem on the early ones.
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

Thanks for the imfo on what to look. Took it for a
drive & it drove quite nice, so I`m keen to buy it.
Thought I`d better get it check out by a Rover place
& there having a look at it on friday for me. The thing
is they suggested not getting a TD5 but a low k 300tdi.
They told me parts are $$$ a set of hoses is about $500
Living 3hrs from Perth could prove a problem if I have
trouble with computors the motors at this stage cannot
be rebuilt, head work can be about $5000.& the injectors
cost hundreds. So now I`m not sure if i need to go there.
Plus how long will FORD produce parts for a deleted motor???

TD5 owners what do you think??? Many dramas, $$$$, etc.

Thanks JEFF :?
rover money pit on mogs !!!
Mat
Posts: 19
Joined: Sun Sep 21, 2003 8:12 am
Location: sydney

Post by Mat »

Plus how long will FORD produce parts for a deleted motor


I think its a BMW motor :D
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

TD5 is a BMW engine. The previous oil burners were Isuzu motors if I remember correctly. You won't have to worry about a Ford donk until after 2007/8.
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Post by uninformed »

Mat wrote:
Plus how long will FORD produce parts for a deleted motor


I think its a BMW motor :D


it may have been designed while LR was owned by BMW but is probably more rover than BMW as they had there own 2.5 tdi 6cyl diesel. but i think the point that JBELL was making is that ford had nothing to do with it. they still produce td5's for defenders as they won't get the new v6 ford/peugot engine until they redesign the defender. the parts thing should be ok. i can't see an availablility problem for parts. you can get good power and toque from the td5, but i'm very happy with my 300tdi, no problems and 170,000. touch wood. just make sure it has the sals rear diff.

serg
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

TD5 is a rover engine, not BMW. And the 200/300 TDi are not Isuzu (mores the pity), they were developed from earlier rover engines.

The TD4/5/6 was designed to have 4, 5 or 6 cylinders depending on the target vehicle.
John
Posts: 37
Joined: Wed Feb 11, 2004 12:43 am
Location: Whyalla, South Australia

Post by Team Raider »

Except for the fact that the TD4 and TD6 are pure BMW ;)
Landrovers... Nothing else comes close!
Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests