Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

converting bottle jack to work upside down.....

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 77
Joined: Mon Sep 13, 2004 8:37 pm

converting bottle jack to work upside down.....

Post by TX4000 »

anyone have any idea how to convert a bottle jack to work inverted ? I have in mind a feed needs to be drilled or something or check valve needs to be inverted.. its for a press, small one only 600 high or so.. I have the frame sorted just need the jack sorted..

Cheers :)
Top
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

the ones i have seen usung a jack use it the right way up pressing a frame down that has the narrow point on it with it being retracted by a couple of heavy springs
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 77
Joined: Mon Sep 13, 2004 8:37 pm

Post by TX4000 »

Yup seen those.. this one is small, for alternators etc. I sussed it out, I have soldered in a pipe to the side of the bottle (the original oil fill hole) and will put a reservoir tank above the height of the bottom (now top) of jack, this ensures that pump is under oil level @ all times, well I hope.. my theory anyway :)

So I guess I sorted my own problem :)

Cheers, and thanks.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest