A quick question for you Chev gurus.
I'm removing the mech fuel pump from my 229 V6 (to run an electric pump), but, there is a slug/pin/dowel thingy that runs up against the cam and operates the fuel pump. Will removing this slug... have any effect on the cam or timing gear oiling or cause any other problems, or should I just leave it in and let it rest up against the back of the fuel pump block off plate?
Paul.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Small block Chev question.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Small block Chev question.
[size=100][color=yellow][b]
It's not what you buy, it's what you build.
[/b][/color][/size]
It's not what you buy, it's what you build.
[/b][/color][/size]
Who is online
Users browsing this forum: No registered users and 114 guests