My 98 3.5 Monterey is coming up to 100,000k, at which time the book says a tappet adjustment is needed, and the scheduled service time is 7 hours or so. This sounds like it will result in a rather large labour bill at the local Holden dealer.
How mysterious is the process? Is it possible for a reasonably competent person to at least remove the rocker covers and check the clearances?
I'd be interested in any opinions on this topic.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Jackaroo 3.5 tappet adjustment
Moderator: Moderators
I work at a dealership, and we do a few rodeos. i know the foreman usually gives it to the better tech's. unfortunatly there is no easy way out, as it all has to be done by trial and error. we have a kit with all the shims in it.
as to you second question, they will need adjusting, they all do. if you dont, you will expect less power, and can burn out the valves.
as to you second question, they will need adjusting, they all do. if you dont, you will expect less power, and can burn out the valves.
www.CVEPerformance.com
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Who is online
Users browsing this forum: No registered users and 0 guests