Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Project Goat - Build Up

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

front spring mounts finished. front springs in and diff in test fit location. It will need to come forward a bit yet. rear spring mounts also done, but i need to make some shackles to get the springs to fit.
here's the front done.
Image
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Why haven’t I been keeping up with this thread! It looks as though it’s coming along great. The idea of lux springs is pretty cool also kinda cheap at the same time.

Keep up the good work.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

the front springs are currently stock front lux springs, with 2 leaves removed. Shackle reversal. had to do a chassis extention at the front and more the rear hangers back a bit aswell. the springs were free :D trying to keep the costs down on some stuff so that the money can be better spent in other areas.
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

got rears done. very temp shackles are holding the springs in place. but at least it allows me to flex it :D
Image

Image
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

Barathrum wrote:got rears done. very temp shackles are holding the springs in place. but at least it allows me to flex it :D


damn that looks like a zuk grave yard :lol:

keep up the good work

your lux springs are a nice idea ;) they work well on the front of the aztec there strong and cheap and have an offset pin :cool:

edit : just noticed they are lux fronts
so they dont have the offset pin
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Post by HRZOOK »

DeWsE wrote:Why haven’t I been padding in this thread

:finger: :D

HRZOOK
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

redzook wrote:your lux springs are a nice idea ;) they work well on the front of the aztec there strong and cheap and have an offset pin :cool:

edit : just noticed they are lux fronts
so they dont have the offset pin


the fronts need some work. i think i'm still gonna run the front lux springs in the front because they are flatter. i'll re drill the pin so that the pin is offset.
the rear are lux rears but they are in backwards so that i get my wheelbase extended and a better departure angle.
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

redzook wrote:
damn that looks like a zuk grave yard :lol:



I seem to enjoy pulling stuff apart :twisted:
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

another angle
Image
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Post by runnin4life »

damb thats awsome for a leaf spring set up but i spose cus itsh ad leafs takin out but yer still awsome
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Funky long shackles :) How long are they :?:
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

-Mick- wrote:Funky long shackles :) How long are they :?:


i made the shackles extra long and drilled several different holes in them so that i could play with the length. the shackles are a very temporary setup when i'm happy with a length of the shackles i will make some new ones that are stronger. there is currently 250mm between the pins. they are big.
Posts: 50
Joined: Fri Oct 22, 2004 5:02 am
Location: Snowy Mountains

Post by pleiades »

Chris, Nathan here...

It is a sad techno world we live in when I can see your house from my veranda, we've been mates for years, we are separated at work by a glass window and I STILL haven't come over to see your crazy Zook.

Kane said your roster has been messed up... when are you off so I can come over and see?

The winch for the Sube will be finished this weekend.
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

pleiades wrote:Chris, Nathan here...

It is a sad techno world we live in when I can see your house from my veranda, we've been mates for years, we are separated at work by a glass window and I STILL haven't come over to see your crazy Zook.

Kane said your roster has been messed up... when are you off so I can come over and see?

The winch for the Sube will be finished this weekend.


we're both off next weekend, so i'll give ya a call.
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

Barathrum wrote:another angle
Image



Who's the ugly bastard in the background :finger: :finger:
----HillBilly Engineering----
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

MY45 wrote:Who's the ugly bastard in the background :finger: :finger:


NOT ME! luckly :D
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

Engine In.
Body On.
Test fit of some rubber, front diff is going to be moved forward 3 or 4 inches. I might still have to get a bit creative with the angle grinder on the front of the body, just to make sure the tires don't rub on full compression.
Image
Image
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

how much did u move the front hanger forward over the stock one?

u would have needed to move it atleast 4.5-5 inch to get it back to stock wheelbase

so its actually moved back over stock?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

redzook wrote:how much did u move the front hanger forward over the stock one?

u would have needed to move it atleast 4.5-5 inch to get it back to stock wheelbase

so its actually moved back over stock?


the front hangers have been moved about 5 inches forward, hence the reason that the mounts currently stick out a bit, they will be braced soon. The front axle is in stock postion with the hilux springs. when i move the diff further forward it will be moving it further forward then the stock postion.
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

Image
Posts: 1586
Joined: Wed Mar 10, 2004 9:51 am
Location: Tumut NSW

Post by DFND90 »

Dude.. is that an air conditioner in the doorway?

How does it go keeping the world cool? :finger:

Ill be over monday arvo for a looksee
[url=http://gods4suckers.net]god is for suckers[/url]
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

DFND90 wrote:How does it go keeping the world cool? :finger:


Gotta fight the global warming somehow :silly:
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

Ran the engine today. First time in 4months :armsup:
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Post by runnin4life »

good to see its coming along nicely
Posts: 2660
Joined: Sun Oct 31, 2004 2:55 pm
Location: Regents Park

Post by kroozer91 »

Dude am back in bris vegas, (Jimboomba Now Actually)

The Zook Looks Great i will be following its build up for sure am going to go to landcruiser park in the next couple of weeks.

Keep the pics coming..

BTW are those the mungrels??? they look bigger and well they dont look like them!!

Keep em Together

WTF is with the air con anyway its to cool there for them LOL :rofl:
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

kroozer91 wrote:Dude am back in bris vegas, (Jimboomba Now Actually)

The Zook Looks Great i will be following its build up for sure am going to go to landcruiser park in the next couple of weeks.

Keep the pics coming..

BTW are those the mungrels??? they look bigger and well they dont look like them!!

Keep em Together

WTF is with the air con anyway its to cool there for them LOL :rofl:


hey mate.
the tire's are 35x10.5x15 Simex :D
Posts: 2660
Joined: Sun Oct 31, 2004 2:55 pm
Location: Regents Park

Post by kroozer91 »

They will more than certinally do tha job, bring on the hill climbs :armsup:
Posts: 1586
Joined: Wed Mar 10, 2004 9:51 am
Location: Tumut NSW

Post by DFND90 »

kroozer91 wrote:They will more than certinally do tha job, bring on the hill climbs :armsup:


Get your ass back down here.. and bring some more home made bourbon :D
[url=http://gods4suckers.net]god is for suckers[/url]
Posts: 2660
Joined: Sun Oct 31, 2004 2:55 pm
Location: Regents Park

Post by kroozer91 »

DFND90 wrote:
kroozer91 wrote:They will more than certinally do tha job, bring on the hill climbs :armsup:


Get your ass back down here.. and bring some more home made bourbon :D


Yeh well mabe visy contacted me yesterday to tell me that the job will be going ahead so mabe i might take it and moove back not to sure yet will have to have a good think about it....

Got that ford now hey...

Going to swap the engine outta the xr6???

Asshat

They made a Anti Asshat Club u know :finger:
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

Looking good, keep the regular updates coming.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests