Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TB42 Cooling System

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 37
Joined: Fri Oct 08, 2004 7:57 pm
Location: Perth WA

TB42 Cooling System

Post by GQGasPig »

Hi All,

I know it has been done to death but I am not a mechanical genius.

I have a dual fuel 4.2 GQ that on idle with air con on during a hot day will creep to 3/4's on the temp guage. When I start driving again the temp drops back to about half which appears to be the norm temp.

I had a new rad put 18 mths ago together with a new thermostat and hoses.

Is this normal? If not, why not and what do I need to do to fix it (besides not sitting at idle for too long)?

Cheers
MS
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

mine does the same.. runs a bit warmer with air on.. new core in radiator etc.. sounds pretty normal to me.. it shouldnt get higher than 3/4 and will fall when driving. mine even climbs when i boot it or driving a long up hill.. but will just get to 3/4 and settle..
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Mine sticks to about a third and climbs a little bit when I give it a bit but 3/4 is a bit to much I think, Check that your fan is working. Both of them that is.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 1040
Joined: Sun Dec 22, 2002 11:15 am
Location: sydney

Post by planb »

viperguy wrote:mine does the same.. runs a bit warmer with air on.. new core in radiator etc.. sounds pretty normal to me.. it shouldnt get higher than 3/4 and will fall when driving. mine even climbs when i boot it or driving a long up hill.. but will just get to 3/4 and settle..


ditto

doesnt get beyond 3/4 but i think that it shouldnt rise beyond half.

i recently flushed the system thoroughly, replaced the water pump and filled it with coolant.

the mechanical fan and clutch ass. works fine (allthough, there are some major cracks in the plastic fan hub area, waiting for it to break) pull still pulls hard.

electric fans run sweet and there is no thermostat

it is definately worse with the ac on, but will climb on long hills.

ive lived with it, but am considering fitting twin au fans. this really shouldnt be necessary though.

me, im pissed :x
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

mine normally runs at half way or a tiny bit less.

with air con on, it runs a little hotter

back in the day when i didnt clean my radiator, it used to reach the first Hot line when four wheel driving, and this was on a cold night!!!!

after cleaning the radiator, it hardly changes offroad and just stays at the same level :armsup:
Gq ute new built
Posts: 396
Joined: Wed Dec 17, 2003 3:34 pm
Location: South Side Brisbane

Post by Draven »

Erm...well mine gets to a little bit before halfway...and doesnt move..even with air on...

The only time ive seen the temp guage move was in 'very' soft sand, with a 'very' big load. (read 60ltrs gas - 70km)
Posts: 85
Joined: Wed Jun 02, 2004 11:26 am
Location: Homeless

Post by Dirty Dave »

is your thermo fan on your a/c working???
and is your clutch fan working properly??
running coolant?? being an alloy head and all??
Xtreme Bolt on Bandit....and your mum loves it!!!
Posts: 1040
Joined: Sun Dec 22, 2002 11:15 am
Location: sydney

Post by planb »

Dirty Dave wrote:is your thermo fan on your a/c working???
and is your clutch fan working properly??
running coolant?? being an alloy head and all??


the thermo on the ac is working

havn't really looked to closely yet, correct me if im wrong

but im thinking there might be a cooler for the auto up front also. if there is, i might think about moving this to improve the air flow
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

As long as you're not losing water too, the temperature rising was the first sign of the No6 cooling jacket corroding into the cylinder on my last motor.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Yes on some they do run up to 3/4.
You must run a Thermostat
Ensure rad fins are clean (remove to clean. NOT just hosed thru on car)
Use 30 to 50% coolant
Ensure clutch fan working (should spin up when you start in morning and drop out within a few minutes)

Temp gauges on these also optimistic

Bazzle
Posts: 84
Joined: Sat Feb 28, 2004 9:02 am
Location: DUBAI

Post by Phill »

I got rid of the thermo and it ran better but the best thing to do is to change your head gasket and add red line water weter to your radiator
Philip Yousef
Editor & PR
Dubai 4X4 CLUB
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

mine use to sit on about one quarter all the time off road on road sitting in traffic then one day it started to rise it turned out to be no6 water jacket it corroded away a little bit
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

planb wrote:
Dirty Dave wrote:is your thermo fan on your a/c working???
and is your clutch fan working properly??
running coolant?? being an alloy head and all??


the thermo on the ac is working

havn't really looked to closely yet, correct me if im wrong

but im thinking there might be a cooler for the auto up front also. if there is, i might think about moving this to improve the air flow


There is a cooler. It runs thru the radiator tanks :x

I just had my radiator rodded ( cleaned) and did the new hoses thing withcoolants etc.

I also fitted a LARGE oil cooler for the auto, and have just left the factory one disconnected.

I had a temp gauge on the auto before the work was done, and it frequently went over 100 degrees. Since fitting an indipendant cooler, it will stay at 50 all day, and when its being reved/ steep hills etc, it may climb as far as 70 :armsup:

Worth the $150 bucks for a cooler in my opinion.

Pete
[url]www.twinstickoffroad.com[/url]
Posts: 1040
Joined: Sun Dec 22, 2002 11:15 am
Location: sydney

Post by planb »

Gutless wrote:
planb wrote:
Dirty Dave wrote:is your thermo fan on your a/c working???
and is your clutch fan working properly??
running coolant?? being an alloy head and all??


the thermo on the ac is working

havn't really looked to closely yet, correct me if im wrong

but im thinking there might be a cooler for the auto up front also. if there is, i might think about moving this to improve the air flow


There is a cooler. It runs thru the radiator tanks :x

I just had my radiator rodded ( cleaned) and did the new hoses thing withcoolants etc.

I also fitted a LARGE oil cooler for the auto, and have just left the factory one disconnected.

I had a temp gauge on the auto before the work was done, and it frequently went over 100 degrees. Since fitting an indipendant cooler, it will stay at 50 all day, and when its being reved/ steep hills etc, it may climb as far as 70 :armsup:

Worth the $150 bucks for a cooler in my opinion.

Pete


nice

thanks for the tip

ive bought a bigass bmw cooler before for $70 new

might just have to get me another one.

where did you mount the oil cooler ?

against the rad ?
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

Its infront of the radiator. It basically covers the side of the radiator that the fan isn't on. I used some spacers to keep the cooler off the radiator. It fit pretty neat too. I will try and get some pics, but i'm not gonna take the bullbar off again to get the grille off, so I can take a proper pic :P :D

Just take some measurements of the area behind the grille and chuck the largest one you can fit in there.
[url]www.twinstickoffroad.com[/url]
Posts: 1040
Joined: Sun Dec 22, 2002 11:15 am
Location: sydney

Post by planb »

cool, thanks dude, lets hope it helps keep the heat down a bit
User avatar
MEX
Posts: 122
Joined: Sun Jul 25, 2004 8:06 pm
Location: Brisbane

Post by MEX »

Gutless,

Can you tell me the brand & model number of the cooler you fitted. Also what effect has the installation of the cooler in front of the radiator had on your engine temp?

MEX
SWB MAVERICK
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

MEX.

I'll have to wait till monday to get you those details, cos the packaging is at the work shop.

As for negative effects on engine temp, there has actually been a slight drop in temp. I think its cos the radiator is no longer having to cool the engine, and the auto.

I spaced the cooler about 10mm off the front of the radiator, so air flows thru the middle ( not much, but it all helps). The auto used to reach about 100degrees during a drive to work, but now it barely goes over 50! So when you look at it that way, the air that passes thru the oil cooler, and into the radiator, is actually colder ( by 50 deg) than the oil that would have passed thru the cooler in the radiator on the original setup. I was thinking of fitting a small thermo fan to it also ( I did this on the auto cooler on the zook. It made a big difference. But the cooler on the zook is mounted behind the ute cab, not up front), but I don't think I need it now.

Pete
[url]www.twinstickoffroad.com[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 174 guests