Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

radius arms

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 181
Joined: Sun Aug 22, 2004 4:37 pm
Location: melbourne

Contact:
Contact swamp

radius arms

Post by swamp »

G'day all.
My first post on nissan forum.
I have a vague memory of aftermarket radius arms that are longer than oe to allow fitment of larger tyres, to stop th tyres rubing on the internal guards.
If anyone has some info on them it would be appreciated.
If you extend the length of the radius it pushes the diff forward, but doesn't this upset the angle of the panhard rod and also the geometery of the springs and the length of the prop shaft.
Regards
Michael
out of my mind, back soon.
Top
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

the spacers are available from big balls in sydney.. check them out on the web site. they are only 12mm so wont interfere with anything. have had them for 12 months and they do what they are supposed to..
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

I'm about to install the 3rd's Productions arms and I'll let you know how the go.
They add 12 mm, adjust the castor, no correction bushes and have a joint near where they bolt in to the chassis.
Construction nad feel are good, see how they travel in the car.
$1495 a set.
CJ
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests