Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60s steering box

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

60s steering box

Post by ZOOK60 »

ive just put 60s power steering box in the zook but the standard pitman arm has a big kick down which makes it hit the springs. does anyone know of a straight pitman arm that i can run that fits this box?
P.E.T.A
People eating tasty animals.
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

I read somewhere on another thread that 80 series ones are flat & fit.



Al
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

Sixty wrote:I read somewhere on another thread that 80 series ones are flat & fit.
thanks for that i just relised if i run a dead flat arm the nut on the balljoint will hit the chassis back to the drawing board



Al
P.E.T.A
People eating tasty animals.
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Jake can you post some pic's of the conversion?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

give me a week as i am only using a comp at the library. i just have to work out what piman arm to run so i can order the new draglink apart from that need to buy the pump and she is all done :lol: :D
P.E.T.A
People eating tasty animals.
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

80 series arms have a slight bend in them
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

all done ended up bending arm with a press
P.E.T.A
People eating tasty animals.
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Hey Jake have a look at redzook's new rig thread in the zook section. He has posted pic's of his conversion on page two
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

DeWsE wrote:Hey Jake have a look at redzook's new rig thread in the zook section. He has posted pic's of his conversion on page two


id say jake has seen my rig already ;)
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest