Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pulley manufacturer

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

pulley manufacturer

Post by cplux »

Hi there does anyone know of a machine shop capable of machining a 4/5 rib pulley. It is to fit onto the front of my supercharger which is an sc14 toyota jobby off a 1ggze
Top
Posts: 227
Joined: Mon Sep 20, 2004 8:05 pm
Location: the vegas

Post by benno_from_brizvegas »

Sorry I don't know but i'd be interested to find out too.

What is the SC14 going on? Been looking at putting the SC12 on my 2.4 lux.

Benno
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

it is on a 4yc petrol hilux. I'd go the sc14 for a 2.4 diesel and it should be piss easy to setup compared to mine (petrol)
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

You want to find a race engine type shop
some would of had to have weird pulleys
made up for them before.
www.bolsys.com.au
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

Any good engineering shop should be able to make 1,probably wont be cheap tho.
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

what he says........any good hand at a lathe should have no probs
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

stuff

Post by ratboy »

i made them on my lathe any one who has a lathe should be able to do it
very easy no spe tools needed
ok it was me
Top
Posts: 34
Joined: Fri Nov 08, 2002 11:42 am
Location: South Aus.

Contact:
Contact Paul

Post by Paul »

I've needed poly-rib pulleys in the past and after talking with a few machine shops, decided that it would be cheaper to find a pulley of the appropriated diameter at a wrecker, cut the centre out of it and either get an adaptor made (bolted on to my harmonic balancer in this case) or in the case of my AC compressor, cut the centre from my stock AC pulley, the outer portion of a Rodeo PS pump pulley and had the two welded together.

Paul.
[size=100][color=yellow][b]
It's not what you buy, it's what you build.

[/b][/color][/size]
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

can do it at my work not sure about time though pretty busy
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests