G'Day fellas,
I have a problem with my old 22R motor.
She's done 350,000 KMs (Rebuilt once)
The belt slips chronically at anything OVER 3000RPM.
Under 3000RPM is usually fine.
I've tried the old CRC Belt-slip (Does little)
Is this problem purely a belt tension issue??
I've already adjusted the belt a little, but could go tighter.
What is the general rule with belt tightness on a 22R?
I don't want to do damage by tightening too much.
Any advice would be appreciated.
Bart-O
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
22R Belt Slip Remedy?
Moderators: toaddog, Elmo, DUDELUX
I have a 22R and I tighten the belts up so they have about the thickness of a belt give...(if that makes any sense)
i.e.
if the belt if 1cm thick, I have it loose enough so that the belt can be pushed in upto 1cm (max)
I have had no problems although I had to replace the alternator belt the other day as I could not adjust any more!
Which belt is slipping?
alt, air con
Is the belt worn, if so replace it as they only cost around $10-$20 depending on which one u need.
Nick
i.e.
if the belt if 1cm thick, I have it loose enough so that the belt can be pushed in upto 1cm (max)
I have had no problems although I had to replace the alternator belt the other day as I could not adjust any more!
Which belt is slipping?
alt, air con
Is the belt worn, if so replace it as they only cost around $10-$20 depending on which one u need.
Nick
Cheers for that Bundy,
I might head into the workshop tonight after work.
I'll tighten to the specifications you gave me.
I only have 1 belt on my motor,
It runs from the balancer, to the alternator, to the pump.
And I always take a spare in case that slipping noise
turns into a snapping noise! You never know.
Thanks mate,
let you know how I go.
P.S. You gonna be up for the massive watagan trip on Sunday 23rd?
The more the merrier I say!!
Bart-O
I might head into the workshop tonight after work.
I'll tighten to the specifications you gave me.
I only have 1 belt on my motor,
It runs from the balancer, to the alternator, to the pump.
And I always take a spare in case that slipping noise
turns into a snapping noise! You never know.
Thanks mate,
let you know how I go.
P.S. You gonna be up for the massive watagan trip on Sunday 23rd?
The more the merrier I say!!
Bart-O
Guts wrote:Take the blet off.
No more sliping belt
What's a BLET?
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Tightened the belt last night to about 1.5 cms slack
(the width of the belt) it seems to have worked!!!
I'll just carry the wrench for adjusting the alternator offset
around with me so next time she slips, I'll just wind it out a little
further.
Thanks for your help on this one Nick,
that belt slipping screech was driving me insane!!
Regards,
Bart
(the width of the belt) it seems to have worked!!!
I'll just carry the wrench for adjusting the alternator offset
around with me so next time she slips, I'll just wind it out a little
further.
Thanks for your help on this one Nick,
that belt slipping screech was driving me insane!!
Regards,
Bart
Who is online
Users browsing this forum: No registered users and 22 guests