How do i lift a Paj? ;)

Post by **M1S3RY** » Thu Dec 23, 2004 4:54 pm

Finally decided to get my butt into gear and do a 2 inch body lift. What i wanted to confirm is the i need 12 blocks for a NH LWB, can someone confirm this for me and what lenght bolts will i need (Obviosly they will be 2 inches longer than standard, but what is standard)?

Thanks for any help.

-Steele

Post by **-Scott-** » Thu Dec 23, 2004 5:01 pm

Yes, you need 12 blocks for a LWB. I believe all bolts are 90mm standard, so you'll need 140mm for after. Threads are a fine pitch, so it may be easier to buy nuts and bolts. Most (all?) bolts have a washer/tang combination welded to the head, so some washers for under the bolt heads is probably a good idea too.

Cheers,

Scott

Post by **Bitsamissin** » Thu Dec 23, 2004 6:05 pm

It's all here :- http://members.optusnet.com.au/~grungle ... ndex1.html

Post by **Hekta** » Thu Dec 23, 2004 7:09 pm

I'd lost the address to Dave's site. That was the first site that inspired me to start modding the jabber. Lots of :cool:

info

Post by **M1S3RY** » Thu Dec 23, 2004 7:36 pm

Thanks guys..

Post by **M1S3RY** » Thu Dec 23, 2004 9:48 pm

Silly question #2 - Do i use High Tensile bolts?

Post by **J Top** » Thu Dec 23, 2004 10:44 pm

Yes,and nyloc nuts are good to.
J Top

Outer Limits 4x4 Board

How do i lift a Paj? ;)

How do i lift a Paj? ;)

Who is online