Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Yep five link is a bolt in kit. Must say I am very impressed with this 2.
FRONT set up:
Springs are 19mm dia wire dobinson 6" and I run a 30mm spacer. I think I would only just have a 6" lift though.
Shocks are 99012 rancho's with pin to eye adaptors on bottom and I cut the top eye off and welded a pin to the top. These shocks where the only ones that seemed to have enough drop. They are a little long on compression but I have also spaced up the shock towers by 50mm. Obviously sway bar disconnects. I run front 'gaybar' on road. Adjustable panhard rod
REAR:
Shocks are also 99012 rancho's.
Rear has small coil drop outs but they do not come into play at the moment as shocks max out before coil drops. I think I will leave it this way.
Coils are 18mm dia wire. I think they are Carrolls. Have polly air bags too but these don't stop travel and I can still pump em up if I have weight in the tray.
Also have nissan rubber bushes throughout rear control arms.
