I have just got a Swift Gti computer and I am going to put it on my zook but I need a wiring diagram if anyone can help me out that would be great.
Paul
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Swift wiring diagram
Swift wiring diagram
1993 Triton V6 on the Build up.....not any more as I now have a Zook to play with.
Re: Swift wiring diagram
ca18escort wrote:I have just got a Swift Gti computer and I am going to put it on my zook but I need a wiring diagram if anyone can help me out that would be great.
Paul
Try this:
tp://www.suzukiinfo.com/misc/swiftgt_manual.zip
Its 58Mb, but I can put the 4 wiring diagrams up as a seperate 6Mb zip file.
Kyle
.: http://www.suzukiinfo.com :.
Paul,
I have all the diagrams and i have given copies to Toohey for his GTI conversion as well.
Send me a pm and i will give you my new number.
I have all the diagrams and i have given copies to Toohey for his GTI conversion as well.
Send me a pm and i will give you my new number.
Danny aka Team Rice
Project GODFATHER has begun........
LWB Zook, G15A Twin Cam Turbo.
Need to get the zook shipped from Perth to Brisbane in pieces, Anyone know anyone in freight??
Project GODFATHER has begun........
LWB Zook, G15A Twin Cam Turbo.
Need to get the zook shipped from Perth to Brisbane in pieces, Anyone know anyone in freight??
Yes I had a Mk1 Escort with a CA18DET in it. went pretty hard conversion was a pain had to lower the steering rack to clear the sump fabricate engine mounts and basically cut out the trans tunnel so that the gear box would fit. There was a custom tail shaft needed and the std radiator had to be replaced, I used a mitsubushi colt AC core.
Cheers
Paul
Cheers
Paul
1993 Triton V6 on the Build up.....not any more as I now have a Zook to play with.
ca18escort wrote:Kyle,
58mb is a bit much for dial up but if you could do the wiring diagrams that would be great.
Paul
I've put the 4 scans here individually:
http://www.suzukiinfo.com/temp/
Kyle
.: http://www.suzukiinfo.com :.
Who is online
Users browsing this forum: No registered users and 0 guests