Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo swapping

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 92
Joined: Fri Apr 09, 2004 11:14 am
Location: UP THE SCRUB

Turbo swapping

Post by LUXon37s »

Hi all just asking around to see if any one has mated a turbo from a

2L or 3L to a 5L

Im after a turbo for my lux and there are a few on here that sound ok but i want to know if they will fit my 5L

Any help would be appreciated

Thanks Gavin
'97 Hilux flat tray SAS 3.0d turbo
detriot locker rear ranchos
37in creepys on there way
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

i'm not too familiar with hilux motors but we've fitted a few turbo's off different motors and as long as you have the stuff in your shed to make adaptors you can do anything. if the turbo is too small (exhaust side) it will lift your exhaust temp too high and increase fuel consumption, but it should boost up quicker. if the turbo is too big it wont boost untill high revs which is crap on a diesel. i think a turbo off a small motor designed for low revs will make a motor twice the size and revs go worse.save some cash and get the right turbo for the job. i learnt the hard way. it was still fun though
Posts: 92
Joined: Fri Apr 09, 2004 11:14 am
Location: UP THE SCRUB

Post by LUXon37s »

would at most .6 of a litre in engine capacity make such a great poblem as there are plenty of turbos of 2.4s getting about it just a matter of them bolting on or not
'97 Hilux flat tray SAS 3.0d turbo
detriot locker rear ranchos
37in creepys on there way
Posts: 14
Joined: Sun Nov 14, 2004 12:11 am
Location: Winnipeg, Canada

Post by MarkR »

Both 2Ls and 3Ls are naturally aspirated, so it is unlikely anyone has done this swap. :D Now if you were wondering about the CT-20 from a 2L-T, there are much better turbo units to use for a swap.
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

The turbo off a 2.4 TD will fit the 2.8, i think there is 1 bolt hole in the manifold that needs to be redrilled for it to line up on the block.

If your going to use the CT-20, spend the money on getting it hi-flowed... it will perform allot better!
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest