Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

In a pickle again

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

In a pickle again

Post by Shark »

Hey guys not sure wether this belongs in another section but seeing as its about a nissan i thought i would ask you guys first.

Had a week off from work and thought i would take my car to my father inlaws and get some of the rust removed. However once we started we saw that someone had been there before and there was a lot more hidden rust around the place. Infact the gutters on the drivers side had heaps of rust . Alot of this had started when the windscreen rubber had cracked and let water it.

So i made a quick decsion to patch it up and sell it. Now everycar that i have ever owned has cost me an absolute motza and i lose so many $1000's of dollars when i sell and im now not sure wether i should sell it.
For starters i think i overpayed when i bought it 10 months ago for $5000. Its a 1982 LWB MQ Patrol with basically not extra's at all but it had only 154k on the clock. Since then i have spent about $3000 on all types of stuff.

Bullbar, 4 spotlights, massive redarc 24v to 12v reducer and new batteries, awesome tint with graphics, mud tyres, waterpump and new radiator, extractors and exhaust system, snorkel, windscreen rubber, new front seats, endless air type compressor with air tank, body lift ETC

So as you can see there is a fair ammount of work done and im not sure wether it would be worth selling. I know most of you guys are over east and i can tell you now that they do sell for more over here but i do think that if i got $5500 or $6000 i would be lucky.

So that leaves the question what do i do?? :armsup: I dont really wanna get rid of her but i also dont wanna see it rust to pieces and lose all the money i paid out in the original purchase.

Shark
Looking for a car
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

Fix the rust properly and respray it......if you spent all that cash then it would be a shame to throw it away
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: In a pickle again

Post by bogged »

have you fixed all the rust properly? If so keep it.

most of the accessories you fitted you can remove and put onto another truck, so dont stress.
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Post by Shark »

The rust has already been " fixed " but NOT properly. We kinda did a bodge job after we saw how much rust was in it. So all we did was bash the rust in and fill it with 4 to 5 coats of bog and then another 4 to 5 coast of primer. Now waiting for my brother to paint it.

MArc
Looking for a car
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Shark wrote:The rust has already been " fixed " but NOT properly. We kinda did a bodge job after we saw how much rust was in it. So all we did was bash the rust in and fill it with 4 to 5 coats of bog and then another 4 to 5 coast of primer. Now waiting for my brother to paint it.

MArc

you do a shonky repair job and then ask if you should keep it?! :shock: :shock:
Rust will only comeback if not fixed properly
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

Redo the **** job and keep the rig......if you do a crap job you ask to loose money!!!!
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Post by Shark »

Well even though its a sh*$ job underneath it looks pretty good on top and it would take someone who really knows their stuff to pick it. Me father inlaw has been panel beating etc for the best part of 35 years. I guess i could always leave it until it starts to come back again and then do it again properly :armsup:

MArc
Looking for a car
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

I agree with tiny. Since you havent painted it yet, fix it properly. if hes the panelbeater of the last Eon, he should have no issues shaping some metal to tack in place.
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

bogged wrote:I agree with tiny. Since you havent painted it yet, fix it properly. if hes the panelbeater of the last Eon, he should have no issues shaping some metal to tack in place.


And if you leavit to rust again the job will be harder to fix and will s**t you more..do the job properly the firt time around and then it wont come back to haunt you I have done makeshift jobs before, and they just end up pissing me off and cost more in the end
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Shark wrote:... it would take someone who really knows their stuff to pick it.


You mean any bloke with a magnet?
KRiS
Posts: 48
Joined: Wed Nov 06, 2002 1:49 pm
Location: Melbourne

Post by pjhsv »

Shark wrote:Well even though its a sh*$ job underneath it looks pretty good on top and it would take someone who really knows their stuff to pick it.


One word....Karma
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

pjhsv wrote:One word....Karma

2 words
loada shit
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

RoldIT wrote:
Shark wrote:... it would take someone who really knows their stuff to pick it.


You mean any bloke with a magnet?
you took the words out of my mouth ;)
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Post by Shark »

Yeah i spose i could but i will still paint it and next time will do it properly. Its hard when you dont have ur own tools and not enough time. And yes we were gonna do it properly but when i saw all the rust i got a bit disheartened and said bodge it and i will sell it.

Oh well u make mistakes and next time i will buy a welder and do it properly.

MArc
Looking for a car
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

its the old saying that applies here.....



DO IT ONCE AND DO IT RIGHT !


there will be more heartache to follow as you discover more "hidden rust" but in fixing it properly you KNOW WHAT YOU HAVE !.....

selling it or trading it in on another rig is stupid.....how much rust will the new rig have in comparision....

BETTER THE DEVIL YOU KNOW
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

V8Patrol wrote:its the old saying that applies here.....



DO IT ONCE AND DO IT RIGHT !


there will be more heartache to follow as you discover more "hidden rust" but in fixing it properly you KNOW WHAT YOU HAVE !.....

selling it or trading it in on another rig is stupid.....how much rust will the new rig have in comparision....

BETTER THE DEVIL YOU KNOW


Exactly what I said, only put more elaquently (spelling)
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Post by morkz »

V8Patrol wrote:its the old saying that applies here.....



DO IT ONCE AND DO IT RIGHT !


there will be more heartache to follow as you discover more "hidden rust" but in fixing it properly you KNOW WHAT YOU HAVE !.....

selling it or trading it in on another rig is stupid.....how much rust will the new rig have in comparision....

BETTER THE DEVIL YOU KNOW


thats the spirit i agree


whats to say u dont pick up another mq/mk with similar problems that age of car is always bound to have rust.

i reckon just fix it and be done with it.. the money u loose in transferring i.e. 1000 to 2000 spend fixing it up aint going to cost much if your father inlaw is a ex panel beater.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Posts: 48
Joined: Wed Nov 06, 2002 1:49 pm
Location: Melbourne

Post by pjhsv »

bogged wrote:
pjhsv wrote:One word....Karma

2 words
loada shit


bogged wrote: I got done for 12kph in the 8kph zone at the caravan park we stayed in.

.....
bogged wrote:my driving record is questionable... Last year I got 2 fines for speeding while overtaking.


Dunno mate....kinda sounds like karma to me.... ;)
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Shark wrote:Yeah i spose i could but i will still paint it and next time will do it properly

Dude next time there will be MORE rust to hack and bodge up... Since you havent painted it yet, why waste the effort, just dig out the bog, and do it right this time, it will take you 1-3 days extra to do it correctly.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

pjhsv wrote:Dunno mate....kinda sounds like karma to me.... ;)

sounds like cops trying to make money out of people to me.. sounds like shit luck to me.. Karma LMAO

and it wasnt me that it happened to.
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

bogged wrote:
pjhsv wrote:Dunno mate....kinda sounds like karma to me.... ;)

sounds like cops trying to make money out of people to me.. sounds like shit luck to me.. Karma LMAO

and it wasnt me that it happened to.


Who beleives in karma.....whenever I do the right thing I geted ****ed around :finger:
If the above post did not offend you in any way please PM me so I can try harder!!
Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests