where to get shackle bolts in melbourne?

Post by **bad_religion_au** » Fri Jan 28, 2005 8:07 pm

building a new set of shackles and need the shackle bolts, greasable or not, really doesn't bother me. i know you can get them, cause the booty fab shackles i pulled from it have them (but the bushings were in so tight i had to bugger the thread to get it out.

it's for a 40 series if it matters.

Post by **bazzle** » Fri Jan 28, 2005 9:01 pm

Toyota, ARB (greasable shackles)

Bazzle

Post by **Nev62** » Fri Jan 28, 2005 9:15 pm

I think Ironman suspension in Clayton sell them. Got greaseable ones for the Radier there and if they have stuff for my 4b, then yours should not be a problem

Post by **bad_religion_au** » Fri Jan 28, 2005 10:42 pm

toyota told me only full shackles were available (this isn't going to be a stock setup)

Post by **Nev62** » Sat Jan 29, 2005 1:37 pm

bad_religion_au wrote:toyota told me only full shackles were available (this isn't going to be a stock setup)

Ford told me the same about the Raider

I think I paid $30 (included freight to my door in sydney overnight) from Ironman Suspension for the front set and a tad more for the rear set.

Just checked the Ironman website and yep they sell greasable shackles for just about anything including the 40 both pre 1980 and post 1980

Post by **rock hopper** » Sun Jan 30, 2005 8:11 am

i make longer shackles and could sell u the bolts or full shackles.\
i make greasable bolts.
what year - model ? is your cruiser .
as the pin size changed in 8/80 >.

the shackles i make are 50mm longer than std . i can make longer .

Post by **mule75** » Wed Feb 02, 2005 8:31 pm

don kyatt in west melb

Post by **scotto** » Wed Feb 02, 2005 9:00 pm

rock hopper wrote:i make longer shackles and could sell u the bolts or full shackles.\
i make greasable bolts.
what year - model ? is your cruiser .
as the pin size changed in 8/80 >.

the shackles i make are 50mm longer than std . i can make longer .

Can we see the rest of this please

Ad - Carrolls Springs - north (past Coburg they're on Sydney Road) they make them, less mark up

Post by **DaveS3** » Wed Feb 02, 2005 10:31 pm

Any Bolt Shop. - I.e Cost Less Bolts - in ringwood.

Hi Tensile with lock washers.

Dave

Post by **bad_religion_au** » Thu Feb 03, 2005 4:26 pm

mule75 wrote:don kyatt in west melb

thanks again, i did get your SMS.

don't need them anymore for this truck, ended up fixing the threads, but may need some for a 1980 troopy one day soon.

Outer Limits 4x4 Board

where to get shackle bolts in melbourne?

where to get shackle bolts in melbourne?

Who is online