Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Which grease for alternator bearings?

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 264
Joined: Tue Aug 17, 2004 6:14 pm
Location: The Hague, Netherlands

Which grease for alternator bearings?

Post by elgordomuygrande »

I'm currently cleaning and rebuilding my alternator, have replaced the bearings, but I'm not sure what kind of grease I should use. Any ideas??

Cheers, Ron
smokin' is bad, especially for your curtains

----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Top
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

If you have replaced the bearings with new sealed bearings then they will not need any grease. New brgs will mostly be pre greased.
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Top
Posts: 264
Joined: Tue Aug 17, 2004 6:14 pm
Location: The Hague, Netherlands

Post by elgordomuygrande »

Unfortunately it are open bearings which have to be greased an then closed with a little plate (old denso alt for 12r toyo engine). read about lithium grease but there seems to be a thousand different kinds of the stuff....

Cheers,
Ron
smokin' is bad, especially for your curtains

----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Top
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

A high temp brg grease will do the trick.
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Top
Posts: 264
Joined: Tue Aug 17, 2004 6:14 pm
Location: The Hague, Netherlands

Post by elgordomuygrande »

Thanks mate, off to the shop....
smokin' is bad, especially for your curtains

----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 3 guests