Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engineers certificate for body style change.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 470
Joined: Wed Aug 04, 2004 11:15 am
Location: Teesdale

Engineers certificate for body style change.

Post by Camshaft1 »

Does anybody know if an engineers certificate is required for a body change of the same make and model but just differnt style. As in removed Patrol wagon body and fitting ute body? Not chopping not changing, just swapping and using all the same mounts. Does anyboby know? Is anybody off outerlimits actually an engineer?
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

you would as the number of seats has changed. But it would be a very easy engineers to pass.

One thing to watch is putting a cab on from a newer model cause then you have to comply with the newer rules etc regarding blinkers etc
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Also in the other direction. What if you had a a swb patrol and cut it into a ute with no roof but still leave the windscreen on. Should that pass engineering ok? Edit- It will have all recquired bar work/ rollc cage and seat belts fitted correctly.
Its not cool, unless it's got boost :)
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

yer also i was thinking of getting a 4 runner and want to put a bobed body on if i can find one would i need an engineer as it woul still have the same amount of seats
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest